Gigabyte H274-S61-LAW1 User Manual
  1. Manuals
  2. Brands
  3. Gigabyte Manuals
  4. Server
  5. H274-S61-LAW1
  6. User manual
Gigabyte H274-S61-LAW1 User Manual

Gigabyte H274-S61-LAW1 User Manual

High density server - intel xeon 6 processors 2u 4-node dp 8-bay gen5 nvme/sata/sas-4 dlc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H274-S61-LAW1
High Density Server - Intel® Xeon® 6 Processors
2U 4-Node DP 8-Bay Gen5 NVMe/SATA/SAS-4 DLC
User Manual
Rev. 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H274-S61-LAW1 and is the answer not in the manual?

Questions and answers

Related Manuals for Gigabyte H274-S61-LAW1

Summary of Contents for Gigabyte H274-S61-LAW1

  • Page 1 H274-S61-LAW1 High Density Server - Intel® Xeon® 6 Processors 2U 4-Node DP 8-Bay Gen5 NVMe/SATA/SAS-4 DLC User Manual Rev. 1.0...
  • Page 2 For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our reseller portal: http://reseller.b2b.gigabyte.com For further technical assistance, please contact your GIGABYTE representative or visit https://esupport.gigabyte.com/ to create a new support ticket For any general sales or marketing enquiries, you may also message GIGABYTE server directly by email: server.grp@gigabyte.com...
  • Page 3 Conventions The following conventions are used in this user's guide: NOTE! Pieces of additional information related to the current topic. CAUTION! Precautionary measures to avoid possible hardware or software problems. WARNING! Alerts to any damage that might result from doing or not doing specific actions.

  • Page 4: Server Warnings And Cautions

    Server Warnings and Cautions Before installing a server, be sure that you understand the following warnings and cautions. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

  • Page 5: Electrostatic Discharge (Esd)

    Electrostatic Discharge (ESD) CAUTION! ESD CAN DAMAGE DRIVES, BOARDS, AND OTHER PARTS. WE RECOMMEND THAT YOU PERFORM ALL PROCEDURES AT AN ESD WORKSTATION. IF ONE IS NOT AVAILABLE, PROVIDE SOME ESD PROTECTION BY WEARING AN ANTI-STATIC WRIST STRAP AT- TACHED TO CHASSIS GROUND -- ANY UNPAINTED METAL SURFACE -- ON YOUR SERVER WHEN HANDLING PARTS.
  • Page 6 Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over two jumper pins. Some jumpers have a small tab on top that can be gripped with fin-gertips or with a pair of fine needle nosed pliers. If the jumpers do not have such a tab, take care when us- ing needle nosed pliers to remove or install a jumper;...

  • Page 7: Table Of Contents

    Table of Contents Chapter 1 Hardware Installation ...................10 Installation Precautions .................. 10 Product Specifications ..................11 System Block Diagram ................... 15 CMC Hub Integrated Architecture ..............16 Multiplexing Management Topology ............... 17 Chapter 2 System Appearance ..................19 Front View ...................... 19 Rear View .......................
  • Page 8 Chapter 4 Motherboard Components ................53 Motherboard Components ................53 Jumper Setting ....................54 Backplane Board Storage Connector ............. 55 4-3-1 CBPH081 ........................55 Chapter 5 BIOS Setup ....................56 The Main Menu ....................58 Advanced Menu ..................... 61 5-2-1 Trusted Computing ....................62 5-2-2 Serial Port Console Redirection ................63 5-2-3...
  • Page 9 5-4-5 IPv6 BMC Network Configuration .................107 Security Menu ....................108 5-5-1 Secure Boot ......................109 Boot Menu ....................112 Save & Exit Menu ..................114 BIOS Recovery .................... 116 BIOS POST Beep code (AMI standard) ............117 5-9-1 PEI Beep Codes ....................117 5-9-2 DXE Beep Codes ....................117 - 9 -...

  • Page 10: Chapter 1 Hardware Installation

    Chapter 1 Hardware Installation Installation Precautions The motherboard/system contain numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user manual and follow these procedures: • Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or warranty sticker provided by your dealer.

  • Page 11: Product Specifications

    Product Specifications NOTE: We reserve the right to make any changes to the product specifications and product-related information without prior notice. Security Server Socket Operating Properties System Š 2U 4-Node - Rear access Dimension Š 440 (W) x 87.5 (H) x 877 (D) mm System fan Power Supply Superchip...
  • Page 12 Storage Front hot-swap: 8 x 2.5" Gen5 NVMe/SATA/SAS-4 Š (NVMe & SATA from CPU_1) Š Socket Security Server Operating Properties Optional internal M.2 (CMTP160 x 4): 4 x M.2 (2260/2280/22110), PCIe Gen4 x4, from CPU_1 Š Superchip System fan Power Supply [1] SAS card is required to support SAS drives.
  • Page 13 Š Max 3000W/ 208-240V~ or 240Vdc Input Š +12.2V/ 245.9A Š +12.2Vsb/ 3A [1] The system power supply requires C19 power cord. System Aspeed® AST2620 Chassis Management Controller Š Management GIGABYTE Management Console web interface Š Dashboard Š Security Server Operating Properties HTML5 KVM Š...
  • Page 14 Security Server Operating Properties Operating Operating temperature: 10°C to 35°C Š Operating humidity: 8-80% (non-condensing) Properties Š Superchip System fan Power Supply Non-operating temperature: -40°C to 60°C Š Non-operating humidity: 20%-95% (non-condensing) Š Note: The ambient temperature and relative humidity of the environment depend on Š...

  • Page 15: System Block Diagram

    System Block Diagram 8-Channel DDR5, 8 x DIMMs 8-Channel DDR5, 8 x DIMMs RDIMM: Up to 6400 MT/s RDIMM: Up to 6400 MT/s CPU0 CPU1 MCR DIMM: Up to 8000 MT/s MCR DIMM: Up to 8000 MT/s 4 x UPI Intel Xeon 6 processors Intel Xeon 6 processors (LGA4710 Socket)

  • Page 16: Cmc Hub Integrated Architecture

    CMC Hub Integrated Architecture Node Bridge Board Node 1 MLAN Centralized (AST2600) Server Management Node 2 MLAN (AST2600) Node 3 (AST2620) MLAN (AST2600) Node 4 MLAN (AST2600) LAN Hub (RTL8365MB) To access CMC, connect the management LAN port of each node. Hardware Installation - 16 -...

  • Page 17: Multiplexing Management Topology

    Multiplexing Management Topology Multiplexing Management Example Spanning Tree Protocol (STP) must be enabled in LAN switch function if using ring topology. Hardware Installation - 17 -...
  • Page 18 LAN Switch and Compute Node Connection Example Correct Incorrect Hardware Installation - 18 -...

  • Page 19: Chapter 2 System Appearance

    Chapter 2 System Appearance Front View NODE1 NODE2 NODE3 NODE4 Description Front Panel LEDs and buttons • Please Go to Chapter 2-3 Front Panel LED and Buttons for detail description of function LEDs. System Appearance - 19 -...

  • Page 20: Rear View

    Rear View PSU2 SLOT2 PSU1 SLOT1 Description PCIe Slot Node System Status LED Mini DisplayPort 2 x USB 3.2 Gen1 GbE LAN Port x 2 BMC Server Management LAN Port OCP 3.0 Slot (SFF Type) PCIe Slot Coolant Pipe Slot System Appearance - 20 -...

  • Page 21: Front Panel Led And Buttons

    Front Panel LED and Buttons NODE1 NODE3 NODE2 NODE4 No. Name Color Status Description This LED represents the RoT function LED behavior. System Status Please see the following section for detail LED behavior. (Note) Reset Button Press this button to reset the system. Green System is powered on Green...

  • Page 22: Rot Leds

    RoT LEDs NODE3 NODE1 Status LED Status LED ID LED ID LED NODE4 NODE2 Status LED Status LED ID LED ID LED LED on Front panel (Note5) ID LED Status LED EC Firmware (FW) Authentication fail or not exit EC FW is broken or not exit (Note1) Authenticating/Recovering BMC/BIOS Images Authenticating Images...
  • Page 23 Blinks Blue Blinks Green 2 times per second 2 times per second BMC : AUTH fail after doing recovery (Note3) [ON OFF OFF] [ON OFF OFF] Blinks Blue Blinks Amber 2 times per second 2 times per second BIOS : AUTH fail after doing recovery (Note3) [ON OFF OFF] [ON OFF OFF]...

  • Page 24: Rear System Lan Leds

    Rear System LAN LEDs Name Color Status Description Yellow 1Gbps data rate 1GbE Green 100 Mbps data rate Speed LED 10 Mbps data rate Link between system and 1GbE Green network or no access Link/ Blink Data transmission or receiving is occurring Activity LED No data transmission or receiving is occurring System Appearance...

  • Page 25: Power Supply Unit Led

    Power Supply Unit LED PSU LED State Description No AC power to all power supplies 1Hz Green Blinking AC present / only standby on / Cold redundant mode 2Hz Green Blinking Power supply firmware updateing mode AC cord unplugged or AC power lost; with a second power supply in parallel still with AC input power Amber Power supply critical event causing shut down:...

  • Page 26: Hard Disk Drive Leds

    Hard Disk Drive LEDs HDD Present RAID SKU Rebuilding LED1 Locate HDD Fault Access (No Access) Disk LED Green ON(*1) BLINK (*2) (LED on Back Panel) Amber No RAID configuration Green ON(*1) (via HBA) Removed HDD Slot (LED on Back Panel) Amber Green BLINK (*2)

  • Page 27: Chapter 3 System Hardware Installation

    Chapter 3 System Hardware Installation Pre-installation Instructions Computer components and electronic circuit boards can be damaged electrostatic discharge. Working on computers that are still connected to a power supply can be extremely dangerous. Follow the simple guidelines below to avoid damage to your computer or injury to yourself.

  • Page 28: Installing The Hard Disk Drive

    Installing the Hard Disk Drive Read the following guidelines before you begin to install the Hard disk drive: • Take note of the drive tray orientation before sliding it out. • The tray will not fit back into the bay if inserted incorrectly. •...

  • Page 29: Removing The Node

    Removing the Node Read the following guidelines before you begin to replace a node: • To make sure the system operates normally, please power off only the node that will be replaced or reconfigured. Follow these instructions to remove a node: Press the release latch while simultaneously pushing down the tray handle for the node.

  • Page 30: How To Get The Bmc Password

    How to Get the BMC Password Follow these instructions to get the BMC Password: Pull out the tab and then you can find the password information on the tab. System Hardware Installation - 30 -...

  • Page 31: Removing Chassis Cover

    Removing Chassis Cover Before you remove or install the system cover • Make sure the system is not turned on or connected to AC power. Follow these instructions to remove the system cover: Loosen and remove the six screws securing the back cover. Slide the cover to the rear of the system and remove the cover in the direction of the arrow.

  • Page 32: Liquid Cooling Assembly Information

    Liquid Cooling Assembly Information The liquid cooling assembly is designed to capture heat from the processors in the node and cool the components. The coolant flow for the assembly is produced by the eight quick disconnects at the rear of the server chassis.

  • Page 33: Liquid Cooling Specifications

    3-5-1 Liquid Cooling Specifications The cold plate assembly in the liquid cooling assembly mounts directly on top of the processors. The retention mechanism for installation on top of the processors is integrated into the cold plate. The liquid coolant contained within the tubes, is a mixture of demineralized water and propylene glycol with the following beneficial features: Anti-Freeze, Anti-Corrosion and Anti Bacterial.

  • Page 34: Removing And Installing The Fan Duct

    Removing and Installing the Fan Duct Follow these instructions to remove/install the fan duct: Remove the four screws securing the fan ducts. Lift up to remove the fan ducts To install the fan duct, align the fan duct with the guiding groove. Push down the fan duct into chassis until its firmly seats, then install the four screws to secure the fan ducts in place.

  • Page 35: Installing The Cpu And The Coolant Pipe Module

    Installing the CPU and the Coolant Pipe Module Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. • Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage.
  • Page 36 Carrier Types used for Package Types Granite Rapids-SP HCC Granite Rapids-SP LCC Package Type Granite Rapids-SP XCC Sierra Forest-SP Clearwater Forest-SP Carrier Code Shim? Integrated TIM Break Lever NOTE! • The carrier code is marked on each carrier and matches a code laser marked on to the IHS(Integrated Heat Spreader) to ensure the right parts are used together.

  • Page 37: Installing Memory

    Installing Memory Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. • Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage.

  • Page 38: Installing The Memory

    3-8-2 Installing the Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. Be sure to install DDR5 DIMMs on this motherboard. Follow these instructions to install the Memory: Insert the DIMM memory module vertically into the DIMM slot, and push it down.

  • Page 39: Dimm Population Table

    3-8-3 DIMM Population Table ntel Xeon 6700E-Series Memory Support Channel Speed (MT/s); Voltage (V); DIMM Capacity (GB) Slots per Channel (SPC) & DIMMs per Ranks Per DIMM and Channel (DPC) Type DRAM Density Data Width 16Gb 32Gb 1DPC/2SPC 2DPC/2SPC 1DPC 2DPC 1DPC 1.1V...
  • Page 40 Intel Xeon 6500P/6700P-Series Memory Support Channel Speed (MT/s); Voltage (V); DIMM Capacity (GB) Slots per Channel (SPC) & DIMMs per Ranks Per Channel Density (DPC) Type DIMM and DRAM Density Data Width 16Gb 24Gb 32Gb 1DPC/2SPC 2DPC/2SPC 1DPC 2DPC 1DPC 2DPC 2DPC 1.1V...

  • Page 41: Processor And Memory Module Matrix Table

    3-8-4 Processor and Memory Module Matrix Table CPU0 CPU1 Memory Q’ty for each CPU 1 DIMM 4 DIMM 8 DIMM 12 DIMM 16 DIMM NOTE: • Xeon 6700E/6500E-series do not support 12 DIMMs Configuration. System Hardware Installation - 41 -...

  • Page 42: Installing The Pci Expansion Card

    Installing the PCI Expansion Card • The PCI riser assembly does not include a riser card or any cabling as standard. To install a PCI card, a riser card must be installed. Follow these instructions to install the left PCI bracket riser: Remove the three screws securing the riser bracket to the system.
  • Page 43 Follow these instructions to install the right PCI Expansion card: Remove the three screws on the riser bracket to the system. Lift up the riser bracket out of system. Remove the screw securing the side bracket to the riser bracket. Remove the side bracket Align the PCIe card to the riser guide slot and push in the direction of the arrow until the PCI-E card sits in the PCI card connector.

  • Page 44: Removing And Installing The Rear Io Card

    3-10 Removing and Installing the Rear IO Card Follow these instructions to install the Rear IO card: Remove the three screws securing the Rear IO card to the system. Lift up the Rear IO card out of system. Reverse steps 1 - 2 to install the Rear IO card back into the system. System Hardware Installation - 44 -...

  • Page 45: Installing The Mezzanine Card

    3-11 Installing the Mezzanine Card 3-11-1 Installing the OCP 3.0 Mezzanine Card Use of the following type of OCP 3.0 NIC is recommended: • OCP 3.0 SFF with pull tab • OCP 3.0 SFF with ejector latch Follow these instructions to install an OCP 3.0 Mezzanine card: Remove the one screw securing the OCP 3.0 card slot cover.

  • Page 46: Replacing The Fan Assembly

    3-12 Replacing the Fan Assembly • Voltages can be present within the server whenever an AC power source is connected. This voltage is present even when the main power switch is in the off position. Ensure that the system is powered-down and all power sources have been disconnected from the server prior to replacing a system fan.

  • Page 47: Replacing The Power Supply

    3-13 Replacing the Power Supply Follow these instructions to replace the power supply: Pull up the power supply handle and press the retaining clip on the right side of the power supply along the direction of the arrow. At the same time, pull out the power supply by using its handle. Insert the replacement power supply firmly into the chassis.

  • Page 48: Cable Routing

    3-14 Cable Routing CPU0 CPU1 CPU0 CPU1 Motherboard: FP_1 Front IO Board: FP_1 Front Panel LEDs and Buttons Cable Front IO Board: FP_1 System Hardware Installation - 48 -...
  • Page 49 CPU0 CPU1 CPU0 CPU1 Middle Board: SATA1 Top Middle Board to HDD Back Plane Board Cable (SATA1) F/ HDD Board: N1 SATA Top Middle Board to HDD Back Plane Middle Board: SATA3 Board Cable (SATA3) F/ HDD Board: N3 SATA Bottom Middle Board to HDD Back Middle Board: SATA2 F/ HDD Board: N2 SATA...
  • Page 50 CPU0 CPU1 CPU0 CPU1 Middle Board: N1_U2_A Top Middle Board to HDD Back Plane Board Cable (NVMe/Node1) F/ HDD Board: N1 U.2 A Top Middle Board to HDD Back Plane Middle Board: N3_U2_A Board Cable (NVMe/Node3) F/ HDD Board: N3 U.2 A Bottom Middle Board to HDD Back Middle Board: N2 U.2 A Plane Board Cable (NVMe/Node2)
  • Page 51 CPU0 CPU1 CPU0 CPU1 Motherboard: MCIO_SATA Motherboard: SATA0 On board SATA Cable Motherboard: MCIO_SATA Motherboard: SATA0 System Hardware Installation - 51 -...
  • Page 52 A1 A2 B1 B2 CPU0 CPU1 CPU0 CPU1 Motherboard: MCIO_SATA RAID Card: A1: SAS 0-3 SAS RAID Card Cable A2: SAS 4-7 (Optional) Motherboard: MCIO_SATA RAID Card: A1: SAS 0-3 A2: SAS 4-7 System Hardware Installation - 52 -...

  • Page 53: Chapter 4 Motherboard Components

    Chapter 4 Motherboard Components Motherboard Components CPU0 CPU1 BIOS2 BIOS1 BMC1 BMC2 Item Description OCP 3.0 Connector (PCIe Gen5 x16) PRoT Module Connector (M.2 M-Key/only enabled on RoT SKU) Proprietary PCIe Slot (Gen 5/ x16 slot/ GENZ_2) BMC Readiness LED Serial Port Cable Connector IPMB Connector IO Card Slot for IO Board...

  • Page 54: Jumper Setting

    Jumper Setting Default Enable Clear CMOS 1 2 3 CLR_CMOS CPU0 CPU1 S3_MASK Stop initial power on when BMC is not ready Normal [Default] BIOS_RCVR BIOS recovery mode Normal [Default] BIOS_PWD Clear supervisor password Normal [Default] RST BMC_EN ID button to enable BMC reset Normal [Default] NCSI Switch SW.1...

  • Page 55: Backplane Board Storage Connector

    Backplane Board Storage Connector 4-3-1 CBPH081 Item Description MCIO 8i (SFF-TA1016/N1 U.2 A) MCIO 8i (SFF-TA1016/N2 U.2 A) MCIO 8i (SFF-TA1016/N3 U.2 A) MCIO 8i (SFF-TA1016/N4 U.2 A) Proprietary PCIe Slot (x8 slot/ GF_HDD1) SlimSAS 8i (SFF-8654/N4 SATA) SlimSAS 8i (SFF-8654/N3 SATA) SlimSAS 8i (SFF-8654/N2 SATA) SlimSAS 8i (SFF-8654/N1 SATA) Motherboard Components...

  • Page 56: Chapter 5 Bios Setup

    Chapter 5 BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the EFI on the motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup, saving system parameters, loading the operating system etc. The BIOS includes a BIOS Setup program that allows the user to modify basic system configuration settings or to activate certain system features.
  • Page 57  Main This setup page includes all the items of the standard compatible BIOS.  Advanced This setup page includes all the items of AMI BIOS special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.) ...

  • Page 58: The Main Menu

    The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter other sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu.
  • Page 59 Parameter Description Project Name Displays the project name information. Project Version Displays version number of the BIOS setup utility. Build Date and Time Displays the date and time when the BIOS setup utility was created. BMC Information BMC Firmware Version Displays BMC firmware version information.
  • Page 60 Parameter Description System Date Sets the date following the weekday-month-day-year format. System Time Sets the system time following the hour-minute-second format. BIOS Setup - 60 -...

  • Page 61: Advanced Menu

    Advanced Menu The Advanced Menu displays submenu options for configuring the function of various hardware components. Select a submenu item, then press <Enter> to access the related submenu screen. BIOS Setup - 61 -...

  • Page 62: Trusted Computing

    5-2-1 Trusted Computing Parameter Description Configuration Enable/Disable BIOS support for security device. OS will not show security device. TCG EFI protocol and INT1A interface will not be TPM v1.2 Support available. Options available: Disable, Enable. Default setting is Enable. BIOS Setup - 62 -...

  • Page 63: Serial Port Console Redirection

    5-2-2 Serial Port Console Redirection Parameter Description Console redirection enables the users to manage the system from a COM1 Console remote location. Redirection (Note) Options available: Enabled, Disabled. Default setting is Disabled. Press [Enter] to configure advanced items. Please note that this item is configurable when COM1 Console Redirection is set to Enabled.
  • Page 64 Parameter Description Parity Š – A parity bit can be sent with the data bits to detect some transmission errors. – Even: parity bit is 0 if the num of 1's in the data bits is even. – Odd: parity bit is 0 if num of 1's in the data bits is odd. –...
  • Page 65 Parameter Description Serial Port for Out-of-Band Management / Windows EMS console redirection allows the user to configure Console Redirection Emergency Management Settings to support Out-of-Band Serial Port management. Services (EMS) Console Options available: Enabled, Disabled. Default setting is Disabled. Redirection (Note) Press [Enter] to configure advanced items.

  • Page 66: Sio Configuration

    5-2-3 SIO Configuration Description Parameter Displays the AMI SIO driver version information. AMI SIO Driver Version Super IO Chip Logical Device(s) Configuration Press [Enter] to configure advanced items. Use This Device Š – When set to Enabled allows you to configure the serial port settings. When set to Disabled, displays no configuration for the serial port.

  • Page 67: Pci Subsystem Settings

    5-2-4 PCI Subsystem Settings Parameter Description PCI Bus Driver Version Displays the PCI Bus Driver version information. When enabled, this setting will initialize the device expansion SLOT_# I/O ROM (Note1) ROM for the related PCI-E slot. Options available: Enabled, Disabled. Default setting is Enabled. SLOT_# Lanes Change the PCIe lanes.
  • Page 68 Parameter Description PCI Devices Common Settings If system has Resizable BAR capable PCIe Devices, this option Enables or Disables Resizable BAR Support. Re-Size BAR Support Options available: Enabled, Disabled. Default setting is Disabled. If the system has SR-IOV capable PCIe devices, this item SR-IOV Support Enable/Disable Single Root IO Virtualization Support.

  • Page 69: Usb Configuration

    5-2-5 USB Configuration Parameter Description USB Configuration USB Devices: Displays the USB devices connected to the system. Enable/Disable the XHCI (USB 3.0) Hand-off support. XHCI Hand-off Options available: Enabled, Disabled. Default setting is Enabled. USB Mass Storage Driver Enable/Disable the USB Mass Storage Driver Support. Support Options available: Enabled, Disabled.

  • Page 70: Network Stack Configuration

    5-2-6 Network Stack Configuration Parameter Description Enable/Disable the UEFI network stack. Network Stack Options available: Enabled, Disabled. Default setting is Enabled. Enable/Disable the Ipv4 PXE feature. Ipv4 PXE Support Options available: Enabled, Disabled. Default setting is Enabled. Enable/Disable the Ipv4 HTTP feature. Ipv4 HTTP Support Options available: Enabled, Disabled.

  • Page 71: Post Report Configuration

    5-2-7 Post Report Configuration Parameter Description Post Report Configuration Error Message Report Enable/Disable the POST Error Message support. Post Error Message Options available: Enabled, Disabled. Default setting is Enabled. Halt On Options available: No Error, All Error. Default setting is No Error. BIOS Setup - 71 -...

  • Page 72: Kmip Server Configuration

    5-2-8 KMIP Server Configuration Parameter Description KMIP Server IP address KMIP TCP Port Number Enter the correct timem zone for this server. Time Zone Default setting is GMT+8. Use User and password credentials to authenticate the Client. Client Credentials Options available: Enabled, Disabled, Clear. Default setting is Enabled.

  • Page 73: Nvme Configuration

    5-2-9 NVMe Configuration Parameter Description NVMe Configuration Displays the NVMe devices connected to the system. BIOS Setup - 73 -...

  • Page 74: Chipset Configuration

    5-2-10 Chipset Configuration Parameter Description Defines the power state to resume to after a system shutdown that is due to an interruption in AC power. When set to Last State, the system will return to the active power state prior to shutdown. When set to Restore on AC Power Loss (Note) Power Off, the system remains off after power shutdown.

  • Page 75: Tls Auth Configuration

    5-2-11 Tls Auth Configuration Parameter Description Press [Enter] for configuration of advanced items. Enroll Cert Š – Press [Enter] to enroll a certificate • Enroll Cert Using File • Cert GUID Server CA Configuration Input digit character in 1111111-2222-3333-4444-1234567890ab format. –...

  • Page 76: Iscsi Configuration

    5-2-12 iSCSI Configuration Parameter Description Press [Enter] to configure advanced items. iSCSI Initiator Name Š – Only IQN format is accepted. Range: from 4 to 223 Host iSCSI Configuration Add an Attempt Š Delete Attempts Š Change Attempt Order Š BIOS Setup - 76 -...

  • Page 77: Intel(R) I350 Gigabit Network Connection

    5-2-13 Intel(R) i350 Gigabit Network Connection BIOS Setup - 77 -...
  • Page 78 Description Parameter Press [Enter] to configure advanced items. Link Speed Š – Allows for automatic link speed adjustment. – Options available: Auto Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, 100 Mbps Full. Default setting is Auto Negotiated. Wake On LAN NIC Configuration Š...

  • Page 79: Vlan Configuration

    5-2-14 VLAN Configuration Parameter Description Press [Enter] to configure advanced items. Create new VLAN Š VLAN ID Š – Sets VLAN ID for a new VLAN or an existing VLAN. – Press the <+> / <-> keys to increase or decrease the desired values. –...

  • Page 80: Mac Ipv6 Network Configuration

    5-2-15 MAC IPv6 Network Configuration Parameter Description Press [Enter] to configure advanced items. Displays the MAC Address information. Š Interface ID Š – The 64 bit alternative interface ID for the device. The string is colon separated. e.g. ff:dd:88:66:cc:1:2:3. DAD Transmit Count Š...

  • Page 81: Mac Ipv4 Network Configuration

    5-2-16 MAC IPv4 Network Configuration Parameter Description Indicates whether network address is configured successfully or not. Configured Options available: Enabled, Disabled. Default setting is Disabled. Options available: Enabled, Disabled. Default setting is Disabled. Enable DHCP Local IP Address Press [Enter] to configure local IP address. Press [Enter] to configure local NetMask.

  • Page 82: Driver Health

    5-2-17 Driver Health Parameter Description Driver Health Displays driver health status of the devices/controllers if installed BIOS Setup - 82 -...

  • Page 83: Chipset Menu

    Chipset Menu The Chipset Setup menu displays submenu options for configuring the chipset functions. Select a submenu item, then press <Enter> to access the related submenu screen. BIOS Setup - 83 -...

  • Page 84: Processor Configuration

    5-3-1 Processor Configuration BIOS Setup - 84 -...
  • Page 85 Description Parameter Processor Configuration Press [Enter] to configure advanced items. CPU Socket 0/1 Configuration Š – Core Disable Bitmap(Hex) • Number of Cores to enable. 0 means all cores. FFFFFFF Pre-Socket Configuration means to disable all cores. The maximum value depends on the number of CPUs available.
  • Page 86 Description Parameter Enable/Disable memory encryption (TME). Memory Encryption (TME) [Output] Options available: Enabled, Disabled. Default setting is Disabled. (Note) Total Memory Encryption Options available: Enabled, Disabled. Default setting is Disabled. Multi-Tenant (TME-MT) Options available: Enabled, Disabled. Default setting is Disabled. Memory integrity Options available: Enabled, Disabled.

  • Page 87: Common Refcode Configuration

    5-3-2 Common RefCode Configuration Parameter Description Common RefCode Configuration Divide physical NUMA nodes into evenly sized virtual NUMA nodes in ACPI table. This may improve Windows performance on CPUs Virtual Numa (note) with more than 64 logical processors. Options available: Enable, Disable. Default setting is Disable. The numbber of virtual NUMA nodes per physical NUMA nodes.

  • Page 88: Upi Configuration

    5-3-3 UPI Configuration BIOS Setup - 88 -...
  • Page 89 Description Parameter Press [Enter] to configure advanced items. Uncore Status Š – Press [Enter] to view the Uncore status. Link Frequency Select Š – Selects the UPI link frequency. – Options available: 12.8GT/s, 14.4GT/s, 16.0GT/s, Auto, Use Per Link Setting. Default setting is Auto. Š...

  • Page 90: Memory Configuration

    5-3-4 Memory Configuration Description Parameter Integrated Memory Controller (iMC) When set to Enable, the system enforces Plan Of Record restrictions for DDR frequency programming. Enforce DDR Memory Frequency POR Options available: POR, Disable. Default setting is POR. Maximum Host DDR Memory Frequency Selecttions in MT/s. If the AUTO option has been selected, a frequency is chosen automatically based on the minimum tCK given by the SPD.
  • Page 91 Description Parameter Press [Enter] to view memory topology with DIMM population Memory Topology information. Press [Enter] to configure advanced items. Intel(R) Flat Memory Mode Support. Š – Options available: Enabled, Disabled. Default setting is Disabled. Memory Map DDR CXL Heterogeneous Interleave support. Š...
  • Page 92 Description Parameter ADDDC Sparing (Note) Š – Enable/Disable ADDDC Sparing. – Options available: Disabled, Enabled. Default setting is Disabled. Enable ADDDC Error Injection Š – Options available: Disabled, Enabled. Default setting is Enabled. Patrol Scrub Memory RAS Configuration Š – Options available: Disabled, Enable at End of POST. Default (continued) setting is Enable at End of POST.

  • Page 93: Iio Configuration

    5-3-5 IIO Configuration Description Parameter IIO Configuration Enable/Disable Intel VMD technology. Intel VMD Configuration Options available: Enable, Disable. Default setting is Disable. Press [Enter] to configure advanced items. DMA Control Opt-In Flag Š – Enable/Disable DMA_CTRL_PLATFORM_OPT_IN_FLAG in DMAR table in ACPI. Not compatible with Direct Device Assignment (DDA).

  • Page 94: Advanced Power Management Configuration

    5-3-6 Advanced Power Management Configuration Description Parameter Press [Enter] to configure advanced items. Intel SST-PP Š – Intel SST-PP Select allows user to choose level. – Options available: Auto, Level 0, Level 1. Default setting is Auto. SpeedStep (Pstates) Š –...
  • Page 95 Description Parameter Press [Enter] to configure advanced items. Hardware P-States Š – When this item is disabled, the processor hardware chooses a P-state based on OS Request (Legacy P-States). – In Native mode, the processor hardware chooses a P-state based Hardware PM State Control on OS guidance.

  • Page 96: Miscellaneous Configuration

    5-3-7 Miscellaneous Configuration Description Parameter Miscellaneous Configuration Press [Enter] to configure advanced items. – SSC1 Enable – Options available: Enable, Disable. Default setting is Enable. ISCLK Configuration – SSC2 Enable – Options available: Enable, Disable. Default setting is Enable. Selects the active video type. Options available: Auto, Onboard Device, PCIE Device, Specific PCIE Active Video Device.

  • Page 97: Runtime Error Logging Settings

    5-3-8 Runtime Error Logging Settings Description Parameter Runtime Error Logging Enable/Disable system error logging function. System Errors Options available: Enable, Disable. Default setting is Enable. Press [Enter] to configure advanced items. WHEA (Windows Hardware Error Architecture) Support Š Whea Settings –...
  • Page 98 Description Parameter Press [Enter] to configure advanced items. Corrected Error Š – Enables and escalates correctable Errors to error pins. – Options available: Enable, Disable. Default setting is Disable. Uncorrected Error Š – Enables and escalates Uncorrectable/Recoverable Errors to error pins. –...

  • Page 99: Power Policy

    5-3-9 Power Policy Description Parameter Selects a Power Policy Quick Setting. Options available: Standard, Best Performance, Energy Efficient. Default Power Policy Quick Settings setting is Standard. Conventional Intel SpeedStep Technology switches both voltage and frequency in tandem between high and low levels in response to processor SpeedStep (Pstates) load.
  • Page 100 Description Parameter Options available: Enable, Disable. Default setting is Enable. Hardware Prefetcher Options available: Enable, Disable. Default setting is Enable. Adjacent Cache Prefetch Options available: Enable, Disable. Default setting is Enable. DCU Streamer Prefetcher Options available: Enable, Disable. Default setting is Enable. L1 Next page Prefetcher Options available: Disable, Native mode, Out of Band mode, Native Mode Hardware P-States...

  • Page 101: Server Management Menu

    Server Management Menu Parameter Description Enable/Disable FRB-2 timer (POST timer). FRB-2 Timer Options available: Enabled, Disabled. Default setting is Enabled. FRB-2 Timer (Note1) Configures the FRB2 Timer timeout. The value is between 1 to 30 minutes. timeout Default setting is 6 minutes. Configures the FRB2 Timer policy.
  • Page 102 Parameter Description System Event Log Press [Enter] to configure advanced items. View FRU Press [Enter] to view the FRU information. Information BMC VLAN Press [Enter] to configure advanced items. Configuration BMC network Press [Enter] to configure advanced items. Configuration IPv6 BMC Network Press [Enter] to configure advanced items.

  • Page 103: System Event Log

    5-4-1 System Event Log Parameter Description Enabling / Disabling Options Change this item to enable or disable all features of System Event SEL Components Logging during boot. Options available: Enabled, Disabled. Default setting is Enabled. Erasing Settings Choose options for erasing SEL. Options available: No, Erase SEL Yes, On next reset,...

  • Page 104: View Fru Information

    5-4-2 View FRU Information The FRU page is a simple display page for basic system ID information, as well as System product information. Items on this window are non-configurable. (Note) The model name will vary depends on the product you purchased BIOS Setup - 104 -...

  • Page 105: Bmc Vlan Configuration

    5-4-3 BMC VLAN Configuration Description Parameter BMC VLAN Configuration Select to configure BMC VLAN ID. The valid range is from 0 to 4094. When BMC VLAN ID set to 0, BMC VLAN ID will be disabled. Select to configure BMC VLAN Priority. The valid range is from 0 to 7. BMC VLAN Priority When BMC VLAN ID is set to 0, BMC VLAN Priority will not be selected.

  • Page 106: Bmc Network Configuration

    5-4-4 BMC Network Configuration Parameter Description BMC network configuration Select NCSI and Dedicated Options available: Do Nothing, Model1(Dedicated), Model2(NCSI), Mode3(Failover). Default setting is Do Nothing. Lan Channel 1 Selects to configure LAN channel parameters statically or dynamically (DHCP). Configuration Address source Options available: Unspecified, Static, DynamicBmcDhcp.

  • Page 107: Ipv6 Bmc Network Configuration

    5-4-5 IPv6 BMC Network Configuration Parameter Description IPv6 BMC network configuration IPv6 BMC Lan Channel 1 Enable/Disable IPv6 BMC LAN channel function. When this item is disabled, the system will not modify any BMC network during BIOS IPv6 BMC Lan Option phase.

  • Page 108: Security Menu

    Security Menu The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that you can set: • Administrator Password Entering this password will allow the user to access and change all settings in the Setup Utility. •...

  • Page 109: Secure Boot

    5-5-1 Secure Boot The Secure Boot feature is applicable if supported by your Operating System. If your Operating System is not supporting Secure Boot, the system will hang when starting the Operating System. Parameter Description System Mode Displays if the system is in User mode or Setup mode. Enable/ Disable the Secure Boot function.
  • Page 110 Parameter Description Press [Enter] to configure advanced items. Please note that this item is configurable when Secure Boot Mode is set to Custom. Factory Key Provision Š – Allows to provision factory default Secure Boot keys when system is in Setup Mode.
  • Page 111 Parameter Description Authorized TimeStamps (DBT) Š – Displays the current status of the Authorized TimeStamps Database. – Press [Enter] to configure a new DBT or load additional DBT from storage devices. Key Management – Options available: Update, Append. (continued) OsRecovery Signatures Š...

  • Page 112: Boot Menu

    Boot Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. BIOS Setup - 112 -...
  • Page 113 Parameter Description Boot Configuration Number of seconds to wait for setup activation key. 65535 (0xFFFF) Setup Prompt Timeout means indefinite waiting. Press the numeric keys to input the desired values. Enable/Disable the Bootup NumLock function. Bootup NumLock State Options available: On, Off. Default setting is On. Enable/Disable showing the logo during POST.

  • Page 114: Save & Exit Menu

    Save & Exit Menu The Save & Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press <Enter>. Parameter Description Save Options Saves changes made and closes the BIOS setup. Save and Exit Options available: Yes, No.
  • Page 115 Parameter Description Loads the default settings for all BIOS setup parameters. Setup Defaults are quite demanding in terms of resources consumption. If you are using low-speed memory chips or other kinds of low-performance components Restore Defaults and you choose to load these settings, the system might not function properly.

  • Page 116: Bios Recovery

    BIOS Recovery The system has an embedded recovery technique. In the event that the BIOS becomes corrupt the boot block can be used to restore the BIOS to a working state. To restore your BIOS, please follow the instructions listed below: Recovery Instruction: 1.

  • Page 117: Bios Post Beep Code (Ami Standard)

    BIOS POST Beep code (AMI standard) 5-9-1 PEI Beep Codes # of Beeps Description Memory not Installed. Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Recovery failed S3 Resume failed Reset PPI is not available...

Table of Contents