Datamax DGL Programmer's Reference Manual page 51

Datamax Setting
BACK AFTER PRINT
MENU LANGUAGE
FAULT HANDLING LEVEL
*1
2
VOID DISTANCE
*0.25in (0-2.00)
RETRY COUNT
*1 (0-3)
Datamax Setting
SERIAL PORT A
SERIAL PORT B
PARALLEL PORT A
PARALLEL PORT B
NIC ADAPTER
HOST SETTINGS
HOST TIMEOUT
Table 4. System Settings Menu
Description
When the present distance is
set with the cutter, present
sensor or GPIO option
enabled, this setting
determines the timing of the
label back up.
ENABLED, *DISABLED
Selects the language in which
the menu system messages
and configuration label are
shown.
When a faulted condition
(ribbon or paper out, failed
bar code, etc.) has been
detected, this setting
determines the action to be
taken by the operator and the
printer.
Table 5. Communications Menu
Description
Controls the communications
settings for the Serial Ports.
Controls the communications
settings for the Parallel Ports.
Controls the communications
settings for the Ethernet
Ports.
Settings which affect all
communications with a host
The number of seconds a
communications port must be
idle before the printer may
process data from a different
port.
*10 SEC (1-60)
PTX Setting
N/A
→
PRINTER CONTROL
Display
Language
N/A
PTX Setting
SERIAL PORT
PARALLEL PORT
ETHERNET PORT /
ADDRESS / PARAMS
All communication port
→
menus Timeout
*10 Sec (1 – 60 Sec)
51