Audio Menu - Hitachi CP-X807 User Manual – Operating Manual

AUDIO Menu

AUDIO Menu
From the AUDIO menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor button
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
NOTE
• The speaker sound may distorted or the case may be trembling when
the volume is too high or treble/bass is emphasized or WOW is activated. In that
case, make the volume reduced, bass/treble low or WOW effect to be weakend.
Item
VOLUME
TREBLE
BASS
SRS WOW
SPEAKER
AUDIO
HDMI AUDIO
38
Using the ▲/▼ buttons adjusts the volume.
High ó Low
Using the ▲/▼ buttons adjusts the treble level.
High ó Low
Using the ▲/▼ buttons adjusts the bass level.
High ó Low
Using the ▲/▼ buttons switches the mode for SRS WOW mode.
HIGH ó MID ó OFF
• SRS WOW™ accomplishes this by providing a panoramic three-
dimensional audio image that extends the sound field in both the
horizontal and vertical planes, and lowers the perceived bass
response well beyond the low frequency limitations of the drivers.
Adjust it depending on the user's preference.
Using the ▲/▼ buttons turns the speaker function on/off.
TURN ON ó TURN OFF
• When the TURN ON is selected the built-in speaker works.
Allocates the audio ports.
(1) Choose a picture input port using the ▲/▼
buttons.
RGB1 ó RGB2 ó HDMI ó MIU
QUIT ó VIDEO ó S-VIDEO ó COMPONENT
(2) Select the audio port to be interlocked with
the input port using the ◄/► buttons.
1 ó 2 ó 3 ó 4 ó
• "M" and "H" are abbreviations of MIU and HDMI.
• M or H can be selected for MIU or HDMI port only. When M or H is
selected, the audio signal to MIU or HDMI port will be output if MIU
or HDMI is chosen as a display source.
• When is selected for an input, the audio will not be output if the
input is chosen as a display source.
The HDMI AUDIO is set to 1 as default. In case the HDMI audio
does not work well, try 2.
1 ó 2
Description
ó H/M