Disassembly Of The Drive Shaft - Powerfix Profi 75640 Operating Instructions Manual

Disassembly of the drive shaft

Disassembly of the short drive shaft e
Wheel rim chuck
µ
Open the chuck with the chuck key through the recess
q
the pump from the mounting
µ
Unscrew the short drive shaft
the open-ended spanner from the pump
Quick-release chuck
µ
Using the open-ended spanner through the recess
w
drive shaft of the pump
µ
Allow the electric drill
volutions. The drive shaft
µ
Remove the pump
µ
Remove the drive shaft
Disassembly of the long drive shaft r
Chuck with SDS fitting
µ
Using the open-ended spanner through the recess,
w
drive shaft of the pump
µ
Allow the electric drill
revolutions. With this the drive shaft
µ
Remove the pump
µ
Remove the drive shaft
All manuals and user guides at all-guides.com
y
.
e
by using a cross-headed screwdriver and
q
.
u
to run with an anti-clockwise rotation and low re-
e
is thereby released from the pump
q
from the mounting
e
from the chuck.
q
.
u
to run with an anti-clockwise rotation and low
r
q
from the mounting
r
from the chuck.
- 7 -
i
and then remove
q
.
i
, counter screw the
y
.
i
counter screw the
will be released from the pump
y
.
q
.
q
.