Advertisement
Advertisement
Table of Contents
Summary of Contents for PPS PPSLift
- Page 1 User Manual...
-
Page 2: Symbol Reference
PPS Lift, as they may tear. ◊ Move the PPS Lift using the transport handles. The PPS LIFT is intended to lift a patient in the supine position from the floor to bed or stretcher ◊ When moving a patient on the inflated PPS height using a blower and a single inflation Lift, use caution and move slowly. - Page 3 Part Identification - PPS Lift® Patient Safety Straps (2) (DO NOT USE TO TRANSPORT) Transport Handles (8) Label Includes: Model#, Serial# and Instructions for Use. PPS Lift, August, 2021, Rev. 1 www.ppsproducts.com...
- Page 4 ◊ 9. If it is necessary to lower the patient or deflate the PPS Lift , release air by opening the uppermost red deflate valve #4. When chamber #4 is fully deflated, move in succession downward to fully deflate PPS WARNING: DO NOT RELEASE MULTIPLE CHAMBERS AT ONCE.
- Page 5 Width: 32” (81cm) or 39” (99 cm) Length: 72” (183 cm) Height: 30” (76 cm) Inflated [each chamber 7 1/2” (19 cm)] LATEX FREE PPS Glide Weight limit: 1200 lbs (544 kg) REQUIRED ACCESSORY: PPS Air Supply PPS Lift, August, 2021, Rev. 1 www.ppsproducts.com...
-
Page 6: Cleaning And Maintenance
First remove any visible soil, then clean the area according to the cleaning product manufacturer’s recommended dwell time and level of saturation. A gentle scrub brush can also be used on the affected area, if necessary, to help penetrate the PPS Lift material. Do not launder the PPS Lift. - Page 7 PPS’s part and and they neither assume nor authorize Equipment that has been neglected, improperly...
Need help?
Do you have a question about the PPSLift and is the answer not in the manual?
Questions and answers