Safety Instructions; Proper Use; General Safety Measures - +GF+ KL 630 Operating Instructions Manual

Operating instructions KL 630
1

Safety instructions

The KL 630 Butt Fusion Machine (hereinafter referred to as KL 630) is
designed according to the latest standards of technology. Using it for
purposes other than those described in this manual may cause injury to
the operator or to others. It may also cause damage to the machine or
other equipment.
Any person in the company, who is involved in the assembly,
disassembly, reassembly,
(inspection, maintenance work, repair work) of theKL 630, must have
read and understood the complete instruction manual, and in
particular Section 1 on "Safety instructions".
It is recommended that the user has this confirmed in writing.
Thus:
•
The machine should only be used when in perfect working order.
•
Always follow the safety instructions.
•
Complete documentation should be kept in the vicinity of the
machine.
1.1

Proper use

The KL 630 is to be used exclusively for the fusion of pipes and fittings
made of PE, PP and PVDF. Any other use is not permitted.
1.2

General safety measures

•
Use only the materials and dimensions specified in this manual. Other
materials may only be used after consulting Georg Fische Omicron
after-sales service.
•
Use only original Omicron spare parts and equipment.
•
Inspect the KL 630 daily for visible signs of damage or defects. Have
damage or defects repaired immediately.
•
Any work on the electrical equipment may only be done by a
specialist.
installation, operation
1 Safety instructions
or maintenance
3