Table of Contents
Advertisement
You can set the On/Off timers so that the set will :
Switch on automatically and tune to the channel of your choice at the time
you select.
Switch off automatically at the time you select.
Note:
Timer menu is in no
presence in D-SUB
and DVI modes;
POWER
DISPLAY
FAV.
-/--/---
Q.VIEW
SLEEP
PSM
TV/AV
CH+
VOL-
MENU
VOL+
CH-
UP
DOWN
PREV.
NEXT
PAUSE
SWAP
NOTE:
1.
After a power failure or
disconnection of the
power, the timer settings
will be lost. In this case,
reset the present time.
2.Before activating ON Time
setup, the Clock must be
correcting calibrated,
otherwise, the timer option
cannot be adjusted.
If to cancel the current
time setting, all the previously
timer setting will also be
inactivated.
Clock and on/off time setting
1
Press the MENU button and CH+/- button, till the
Timer menu display on the screen.
USB
SSM
MUTE
2
Press VOL+ buttons to enter, press VOL - buttons to
select hour position of Clock and press repeatedly to
set the value of hour; press VOL + buttons to select
LEFT
the minutes position of Clock and press repeatedly
set the value of minute.
RIGHT
3
and press CH+/- buttons to select OFF Time/ON
ENTER
Time, press VOL - buttons to select hour position and
EXIT
press repeatedly to set the value of hour; press VOL +
buttons to select the minutes position and press
repeatedly set the value of minute.
4
press CH+/- buttons to select ON Prog, press VOL
+/- buttons to set the desired channel.
Indication will appear on the screen 10 seconds
prior to expiry of set time.
Suppose off-time is set, and indication is as follows:
Note: when the above indication appears on the screen, press
VOL+/- button to change the setting time.
Timer menu
Clock
OFF Time
ON Time
ON Prog.
A
B
Remind Time
C
Remind Prog.
Timer
OFF TIME
8 S
-- --
-- --
-- --
---
-- --
-- --
Enter
27
Advertisement
Table of Contents
