Table of Contents
Advertisement
Maintenance: Periodical maintenance and cleaning can guarantee the normal operation of
microwave oven.
Use soft cloth and neutral soapy water to clean the cabinet,
and wipe it with soft dry cloth.
Use humid cloth to clear the food scrap on the door, door
seal and inside the cavity. Use wet cloth and soapy water t
o clear the greasy stain.
Keep the inner side of the door clean. Remove any food
residue as it may cause igniting, smell or rusty spot inside
the cavity, and corrode the cavity.
If the power supply cable is damaged or faulty, make sure to
have it replaced by the professional maintenance personnel of the manufacturer or after-sale services department.
Remarks:
1. If the microwave oven is idle for a long time, please clean the water stain and greasy stain that may remain on
each part of the oven, and place it in dry environment with good ventilation to avoid rusting.
2. In usage of grilling microwave oven, DO NOT make the power cord contact the light-wave tube at the upper
side of cabinet. It may cause softening and deforming of power cord and result in safety problems!
Warning If the microwave oven has abnormal operation or is damaged, DO NOT use it
any more before it is repaired by professional maintenance technicians
In maintenance or repair, the maintenance personnel shall pay attention that:
Components easy to dismantle and likely to
contact voltage above 250V:
1. Magnetron
2. High-voltage transformer
3. High-voltage capacitor
4. High-voltage diode
5. AK rectifier
Do not expose any part of your body to the radiation of the
microwave generator or other components that transfer the
microwave energy!
Maintenance·Repair
Components that may cause excess microwave leakage and the
reason:
1. Magnetron: improper installation on the wave guide
2. Door hook, body and up/down hinges: improper installation
3. Door body and cabinet: damaged
Microwave radiation
18
Advertisement
Table of Contents
