Aiwa AV-NW50 Operating Instructions Manual page 8

ABOUT THE REMOTE CONTROL
Inserting batteries
Open the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
• Replace the batteries with new ones when the operational
distance between the remote control and the main unit becomes
shorter.
• Remove the batteries if the unit is not going to be used for an
extended period of time.
• The remote control may not operate if it is used under intense
sunlight or if its line of sight is obstructed.
Important
ENTER on the remote control substitutes for ENTER on
the main unit when the function is FM or AM. In other
functions, this button is mainly for operating the DVD player.
To use the function printed above the button in orange
Hold down SHIFT and press the button.
To select the function with the remote control
Press FUNCTION repeatedly. The function changes cyclically.
OPERATING OTHER EQUIPMENT
This remote control allows you to operate other equipment
besides this receiver by inputting the brand code.
0-9
VIDEO1,
VIDEO2,
DVD,CD,
CABLE/SAT.,
TV
SHIFT
Setting the brand code
Before operation, check the brand code of your equipment. Brand
code is shown at the end of the operating instructions.
1 Turn on the equipment to be operated with the
remote control.
2 Hold down the corresponding source button
(VIDEO 1, VIDEO 2, TV, DVD, CD or CABLE/SAT.)
and press the numbered buttons 0-9 to input the
three-digit brand code.
3 Release the corresponding source button.
8
ENGLISH
FUNCTION
TUNER
Operating other equipment
Press the corresponding source button you want to operate. The
remote control goes into the corresponding source operation
mode.
Some brands have plural brand codes.
After setting a brand code, check whether the remote control
functions correctly or not by pressing basic operation buttons
such as POWER, c and s. If not, try to set other codes.
To operate this receiver after operating other equipment,
press TUNER to restore the normal mode.
NOTE
• The remote control may not correspond to all the models of the
brand shown at the end of the operating instructions.
• Some buttons on the remote control may not work exactly.
• When the batteries are removed, all the settings stored in
memory may be lost.