SAFETY INSTRUCTIONS Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Ensure the heater is securely mounted on the wall with the air outlet facing downward. Avoid placing it in unstable or tilted positions. 2.
Page 3
for their safety. 16. Children should be supervised to ensure that they do not play with the appliance. 17. CAUTION: Certain parts of the product can become very hot and cause burns, especially where children and vulnerable individuals are present. Exercise caution accordingly. REMOTE CONTROL BATTERY WARNING This product contains a coin/button cell battery inside.
PRODUCT OVERVIEW Model WMH20 Rated Power 2000W Rated Voltage 220-240V~ Frequency 50/60Hz INSTALLATION Drill two holes in the wall, maintaining a distance of at least 2.0m from the ground. The hole diameter should be 6mm. Once the anchor plugs and screws are in place, attach the heater. Secure to the wall as illustrated below.
The distance between the product and the ceiling/walls should be ≥30cm. Note: When installing the product, align the screw with hole “A” on the product. Once hung, slide to position “B” to securely fasten it. When removing the product, shift from position “B” back to “A” before taking it off.
Page 6
Remote control ON/OFF fan only Low heat High heat Timer (1-8 hours) Temperature increase/ decrease Display Low heat (1000W) High heat (2000W) Timer (1-8 hours) Set temperature mode...
CLEANING & CARE • Wait for the heater to cool down and ensure the plug is disconnected before cleaning. • Use a soft, damp cloth with mild detergent; do not use abrasive detergents and do not immerse in water or any other liquid. •...
Need help?
Do you have a question about the WMH20 and is the answer not in the manual?
Questions and answers