Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ATrack BL1 Series
- Page 1 BL1 Series / Rugged Bluetooth Sensor User Manual V00 (DVT) Aug. 21th, 2024...
-
Page 2: Table Of Contents
CE Representatives (CE Cert. have been processing) ..........3 1.7. Regulatory statement and RF exposure statement..........3 1.8. Document Amendments ..................4 2. Product Specification ................5 3. Installation ....................6 3.1. Package Content ..................... 6 3.2. Optional Accessories ....................6 ATrack Technology User Manual... -
Page 3: Notification
ATrack Technology Inc. products are not intended to be used as life support or rescue equipment. Product name Model name ATrack Technology Inc. is not liable for any loss or injury caused by using or referencing to any of Rugged Bluetooth Sensor BL1/BL1-T its products. -
Page 4: Ce Representatives (Ce Cert. Have Been Processing)
This equipment has been tested and found to comply with the limits for a Class B digital device, The followings are authorized to represent ATrack Technology, in compliant to pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection CE regulation. -
Page 5: Document Amendments
L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. ATrack Technology User Manual... -
Page 6: Product Specification
Up to 600M in open area (Base on +3dBm TX power) Temperature EN12830 (have been processing) Recorders Transmit Protocols Default: iBeacon, Eddystone, ATrack Proprietary Impact Resistance IEC 62262 test (IK10) Internal Temp. −20°C to +70 °C IP Rating IP69K, IP68... -
Page 7: Installation
Verify that you received the following items in the package: 1x Grinder Wrench 1x Pushpin magnets 1x BL1/BL1-T Device 2x Screws M4.0x20mm for mounting tracker to wood surface 2x Screws M4.0x19mm for mounting tracker to Metal surface ATrack Technology User Manual... -
Page 8: Table Of Contents 3.3. Activating The Sensor
Important: As the LED starts flashing again during this second sensing, immediately remove the magnet, ensuring it is kept away from the BL1 device. 5. Confirmation After the second sensing, the device should be successfully powered on. Verify by checking for any indication of normal operation. ATrack Technology User Manual... -
Page 9: Led Indicator
Locate the two round holes on the back cover of the device. Insert the grinder wrench securely into each hole. Color Indication Description Power Amber LED Flash 3 times 0.5 second duty cycle The BL1 is activated ATrack Technology User Manual... - Page 10 "O" mark. This will unlock and release the back cover. Once the back cover is take out the depleted battery from its compartment by lifting it from the right side. loose, gently remove it. ATrack Technology User Manual...
- Page 11 Ensure that the positive terminal clip of the battery positioned around the edge of the cover. This ensures the device remains sealed and holder is above the battery, as shown in the diagram. waterproof. ATrack Technology User Manual...
- Page 12 "O" mark to the "I" mark. This will lock the back cover securely. Power On the Device After closing the back cover, power on the device to ensure it is functioning properly with the new battery. ATrack Technology User Manual...
-
Page 13: Mounting Recommendations
1. Magnet on the Back Cover: Use the magnet on the back cover to attach the device securely to a metal surface. 2. Screw Mounting: Use two screws to firmly attach the device to the desired location. ATrack Technology User Manual...
Need help?
Do you have a question about the BL1 Series and is the answer not in the manual?
Questions and answers