Elecom NESTOUT DE-NEST-GLP01 Manual

Model: DE-NEST-GLP01
Manual
ENGLISH
Names of individual components
Main unit
1
2
3
Connector
How to use
How to connect
Open the battery's cap and attach
the connector.
* Screw on the connector until there
is no gap.
* It may be a little difficult to screw
on the connector. This is normal.
Verify the position of this product
and the USB-A port of the battery
when connecting.
* Push it in until there is no gap
and it will be locked in.
LED Lantern
Mini tripod
1 Light
2 Rotary switch
3 Lock
4 Strap loop
4
This LED lantern is designed
to be used specifically with
the NESTOUT outdoor
battery. The battery is not
included. Please purchase
the battery separately.
Check that the rotary switch on
the main body is at OFF.
* The LED may not light up when
connected to the battery while
the switch is at ON due to the
battery's protection function.
Turn the rotary switch to ON
to switch on the light.
Turn the switch OFF before
removing this product. Press the
lock to unlock and hold while
pulling the LED lantern out from
the battery. Finally, remove
the connector.
Brightness adjustment
Turn the rotary switch to power it ON
and continue turning it to increase
the brightness. Adjust it to your
preferred brightness.
Possible usage time:
(reference value)
Usage time for
5000 mAh capacity: approximately
4.5-26 hours and above
* The usage time may be shorter due
to the characteristics of the portable
power charger and surrounding
temperature.
* The switch is analog and unstepped.
There may be individual differences
between the displayed value and the
minimum and maximum brightness.
* The display indicating remaining
battery charge may not display
correctly when used on the minimum
brightness continuously. The usable
time will not be reduced.
* When the output of the dedicated gear
is low (low intensity), the light will
automatically turn off in approximately
2 hours if the battery side is in normal
mode, and in approximately 12 hours
in gear mode.
Gear mode (operate on the battery)
The portable power charger will turn
OFF automatically after approximately
2 hours, when the light is on low light.
Gear mode will allow for continuous
use of approximately 12 hours.
Click the power button on the side of
the battery twice quickly (double click)
to turn gear mode ON / OFF.
Gear mode ON → Power LED blinks
* Gear mode will be deactivated when
the same action is performed or
when the power is turned OFF.
Specifications
Brightness
Color adjustment
Color temperature
Light
Dimensions
[Width] × [Depth] × [Height]
Mini
tripod
Input
Input terminal
How to attach the mini tripod
Unfold the tripod and screw the
battery onto it by twisting the strap
loop in the center to secure.
* The mini tripod can be opened to
2 heights.
Folding in the rotary switch
The tab of the rotary switch can be
folded in. Please fold it in at the
power OFF position, as illustrated.
Approximately 10 Im - 350 Im
* Theoretical brightness
Warm white
Approximately 2800 K - 3200 K
Approximately 100 × 35 × 119 mm
(Approximately 3.9 × 1.4 × 4.7 in.)
(Unfolded)
Approximately 145 × 130 × 45 mm
(Approximately 5.7 × 5.1 × 1.8 in.)
(Folded)
Approximately 31 × 29 × 90 mm
(Approximately 1.2 × 1.1 × 3.5 in.)
5 V/2.0 A
USB-A