Advertisement
Quick Links
To set up your Touch device you will complete the following
Unpack & confirm contents
1
Attach the fingerprint reader
2
Install software
3
Mount your device
4
Setting up Attendance Tracking
5
UNPACK & CONFIRM CONTENTS
1
Included with your shipment:
(1) Procare Touch computer with articulating
arm and base attached
(1) Flat wall mount plate with 4 small bolts
(1) Power brick/power supply
(connects to computer)
(1) Fingerprint Reader with attached USB
cord (connects to Touch device)
(1) Power cord (connects to power brick)
If you are missing an item listed above,
please contact our customer support team
at
support@procaresoftware.com
Procare Touch
Installation Instructions
www.procaresolutions.com
Pre-attached
desk base and
articulating arm
Flat wall mount
plate and screws
Side mount
fingerprint reader
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Procare Touch
Summary of Contents for Procare Touch
- Page 1 Procare Touch Installation Instructions To set up your Touch device you will complete the following Unpack & confirm contents Attach the fingerprint reader Install software Mount your device Setting up Attendance Tracking UNPACK & CONFIRM CONTENTS Pre-attached Included with your shipment:...
- Page 2 The Fingerprint mounts on to the right side of the monitor, looking from the back of the monitor: A. On a flat and clean work surface, carefully lay the monitor face down so the back of the Touch computer exposed. The pre-attached desk base and articulating monitor arm will be facing you.
-
Page 3: Install Software
Cable Guard INSTALL SOFTWARE Install the software and confirm everything is working before mounting the Procare Touch on your wall or counter. It’s much easier to reach the power switch and ports with the computer on your desk or work bench. - Page 4 Installation Instructions MOUNTING YOUR PROCARE TOUCH If your Procare Touch is going to be free standing on a desk or countertop, your device should look like the below image. You are now free to place the device where you see fit.
- Page 5 Procare Touch Installation Instructions To secure the Touch to a desk or countertop or for wall mounting: A. On a flat and clean work surface, carefully lay the monitor face down so the back of the Touch computer is facing you. The Touch 11.6 computer pre-attached desk base and articulating monitor arm will be facing you.
- Page 6 • Follow steps under “Get Ready to use a Check-In Computer” Support For support setting up your Procare Touch device contact our customer support team. Procare Support Hours: M-F, 6 a.m. - 9 p.m. ET Phone: (800) 964-1729 Email: support@procaresoftware.com...
Need help?
Do you have a question about the Touch and is the answer not in the manual?
Questions and answers