Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Piper AccuStream TS7
- Page 1 AccuStream Operator Manual...
-
Page 2: Power Unit
The alert tower is located in the milking parlor and alerts the operators when the trailer is full and if there is a temperature alert POWER UNIT The power unit powers the Piper AccuStream kit. It can be used to power cycle (power off and on) the TS7 control unit... -
Page 3: Network Status Indicators
NETWORK STATUS INDICATORS The status indicators are explained in Table 1 below. These indicators are shown on the home screen and on the home screen Communications Symbol Description GREEN: Connection to Server YELLOW: Establishing connection to Server RED: Connection to Server. Table 1 Status Indicators KEYPAD The HMI has a virtual keypad that can be used for entering values... - Page 4 REGISTERING A TRAILER / STARTING A LOAD INDEX SCREEN ACTION Press the View Ports Button View Ports Note: You can pre-register a trailer at any time. This can be done by the farm operative or driver depending on the farm operating procedures Tap on the trailer icon to select the port number at which the trailer will be registered Select...
- Page 5 4. Disconnect the pickup hose from the full trailer 5. Connect the hose to the trailer to be loaded 6. Check the Piper AccuStream screen to ensure the correct port is showing as being connected 1. * Identify the load details on the new sample bag 2.
- Page 6 ENDING THE LOAD INDEX SCREEN ACTION Press the View Ports button End Load Press on the trailer icon to select the port number at which the trailer will be un-registered Press the FINISH button Finish The Load Note: This process can be carried out at any time after the trailer is full and before the trailer is picked up by the driver 1.
- Page 7 Check the Piper AccuStream screen to ensure that no port is connected Activate the CIP on the farm wash system Start CIP Check the Piper AccuStream HMI to ensure that it is recording the CIP Table 5: CIP *** If Installed...
- Page 8 ALERT TOWER...
- Page 9 FLOW WITH NO PORT CONNECTED If the Piper AccuStream detects that there is flow with no port connected the HMI will display a message to select a port. After manually selecting the port, a hand symbol will appear beside the port number. The manual port...
- Page 10 HMI ICONS 1. Network symbol 2. Date & time 3. Sample Storage 4. Loaded Weight 5. Flow 6. Milk / CIP Temperature 7. Active Port Number 8. Manual Port Selection Icon 9. Current Status 10. P3 Probe a. Grey = Wet (Pipe Full) b.
-
Page 11: Print Report Button
NO PRINTER PAPER If the Piper AccuStream detects that there is no paper in the printer the HMI will display a message. After inserting a new paper roll and press PRINT otherwise press EXIT to continue without printing PRINT REPORT BUTTON...
Need help?
Do you have a question about the AccuStream TS7 and is the answer not in the manual?
Questions and answers