Subscribe to Our Youtube Channel
Summary of Contents for SHOWTEC 50235
- Page 1 MANUAL ENGLISH Wireless DMX Transceiver Ordercode: 50235 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Receiving Mode ................................. 7 Configuration – Example 1 ............................8 Configuration – Example 2 ............................8 Fixture Linking ................................. 9 Data Cabling ................................. 9 Maintenance ..................................10 Troubleshooting................................10 No Light ..................................10 No Response to DMX..............................11 Product Specifications ..............................12 Notes ....................................13 Ordercode: 50235... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Wireless DMX Transceiver • DC power adapter 9V, 1A (0,75 m) •... -
Page 4: Operating Determinations
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service. -
Page 5: Rigging
UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK SILVER NEUTRAL YELLOW/GREEN GREEN GREEN PROTECTIVE GROUND Make sure that the device is always properly connected to the earth! Improper installation can cause serious injuries and/or damage of property! Ordercode: 50235... -
Page 6: Return Procedure
After this period complaints will not be handled anymore. Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement from which the obligation is resulting. Ordercode: 50235... -
Page 7: Description Of The Device
03) Receiver LED indicator 04) 4-digit LED display 05) Receiving Mode button 06) DOWN button 07) UP button 08) Transmitting Mode button 09) DC 9-12V adapter connector 10) 3-pin DMX signal connector OUT 11) 3-pin DMX signal connector IN Ordercode: 50235... -
Page 8: Installation
It is possible to set up multiple receivers with the same ID number. It is NOT possible to set up multiple transmitters with the same ID number. Note : Link all cables before connecting electric power Ordercode: 50235... -
Page 9: Configuration - Example 1
Wireless DMX Transceiver Configuration – Example 1 Fig. 02 Fig. 03 Configuration – Example 2 Fig. 04 Ordercode: 50235... -
Page 10: Fixture Linking
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m). DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m), • FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m). Ordercode: 50235... -
Page 11: Maintenance
01) Power supply. Check that the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Wireless DMX Transceiver and/or the light effect to your Showtec dealer. 03) If all of the above appears to be O.K., plug the unit in again. -
Page 12: No Response To Dmx
Turn up the air conditioning • Disconnect the fixture and return it LEDs damaged to your dealer The power supply settings do not • Disconnect fixture. Check settings match local AC voltage and and correct if necessary frequency Ordercode: 50235... -
Page 13: Product Specifications
Wireless DMX Transceiver Product Specifications Model: Showtec Wireless DMX Transceiver Input Voltage: 100-240 VAC, 60/50Hz Power supply: 9V, 1A power adapter Dimensions: 180 x 120 x 145 mm (LxWxH) Weight: 0,6 kg Operating and Programming: Signal pin OUT: Pin 1 (earth), pin 2 (-), pin 3 (+) -
Page 14: Notes
Wireless DMX Transceiver Notes Ordercode: 50235... - Page 15 Wireless DMX Transceiver Ordercode: 50235...
- Page 16 ©2015 Showtec...
Need help?
Do you have a question about the 50235 and is the answer not in the manual?
Questions and answers