Related Manuals for Skid Pro WX210-SKD
Summary of Contents for Skid Pro WX210-SKD
- Page 1 OPERATOR'S MANUAL WX 210-SKD / WX 210B-SKD Log Splitter Rev Jan-2024 Document Number: Z97920_En...
-
Page 2: Delivery Inspection Report
Log Splitter Delivery Inspection Report Skid Pro Attachments WX210-SKD / WX210B-SKD Mini Skid Steer Log Splitter To register your product and start the warranty, go to www.skidpro.com. This form must be completed by the dealer at the time of delivery, and then signed by the dealer and customer. -
Page 3: Table Of Contents
WX210-SKD / WX210B-SKD Log Splitter Table of Contents 1. Introduction ............6 9. Service and Maintenance ........27 1.1 Types of Labels on the Machine ........ 7 9.1 Service and Maintenance Safety ......27 9.2 Fluids and Lubricants ..........27 2. Safety ..............8 9.3 Maintenance Schedule .......... -
Page 4: Limited Warranty
If it is determined the defective parts are to be returned and they are not received by Skid Pro within 30 days of receiving the replacement parts, the Buyer will be charged for the cost of the replacement parts plus any shipping charges. -
Page 5: Serial Number Location
WX210-SKD / WX210B-SKD Log Splitter Serial Number Location Always provide the model and serial number of your Skid Pro Attachments product when you order parts, or request service or other information. The product information plate location is shown in the following illustration. -
Page 6: Introduction
Keep this manual available for frequent reference and to give to new operators or owners. Contact Skid Pro Attachments if you need assistance, information, or additional copies of the manuals. -
Page 7: Types Of Labels On The Machine
This type of gives information to the operator or shows the operation of a control. There are different types of labels on your Skid Pro Attachments product. The labels are for safety, information, and product identification. -
Page 8: Safety
YOU are responsible for the safe operation and maintenance of DANGER your Skid Pro Attachments product. YOU must make sure that Identifies a hazardous situation that, if not avoided, will result in you and anyone else who uses, maintains, or works around serious injury or death. -
Page 9: Safety Rules
• Prolonged exposure to loud noise can cause permanent hearing loss. Power equipment with or without a vehicle Skid Pro Attachments puts considerable effort into attached can often be noisy enough to manufacturing products that are safe to use; however, it is also cause permanent, partial hearing loss. -
Page 10: Safe Condition
WX210-SKD / WX210B-SKD Safety Log Splitter 2.7 Safety Training • Look for and avoid overhead hazards (for example; branches, cables, and electrical wires). An untrained operator can cause serious injury or death to • Do not exceed the limitations of the machine. If the machine themselves or others. -
Page 11: Sign-Off Form
WX210-SKD / WX210B-SKD Safety Log Splitter 2.8 Sign-Off Form The design and manufacture of this product conforms to the applicable provisions in the following standards: Everyone who uses this machine must read and fully • ISO 4254-1:2013, Agricultural machinery - Safety - Part 1: understand all safety, operation, and maintenance information in General requirements. -
Page 12: Work Site
WX210-SKD / WX210B-SKD Safety Log Splitter 2.9 Work Site A safe work area is divided into two zones: • Safe Zone The safe zone is the area outside the work zone perimeter. CAUTION! All people who are not directly involved with the work can It is the responsibility of the operator to be fully be in this area. -
Page 13: Hydraulic System Safety
WX210-SKD / WX210B-SKD Safety Log Splitter 2.10 Hydraulic System Safety • Do not bend or hit high-pressure hydraulic hoses. • Never adjust a pressure relief valve or other pressure- limiting device to a pressure that is greater than the CAUTION! specified rating. -
Page 14: Safety Labels
WX210-SKD / WX210B-SKD Safety Labels Log Splitter 3. Safety Labels 3.1 Replace a Safety Label WARNING! • Always replace safety labels that are missing or have Replace all safety labels that are missing, become illegible. Replacement safety labels are available damaged, or illegible. -
Page 15: Safety Label Locations
WX210-SKD / WX210B-SKD Safety Labels Log Splitter 3.2 Safety Label Locations The numbers correspond with the Safety Label Definitions on page 16. Figure 2 – Safety label locations Rev Jan-2024 Skid Pro... -
Page 16: Safety Label Definitions
WX210-SKD / WX210B-SKD Safety Labels Log Splitter 3.3 Safety Label Definitions 4. Warning! Wear the necessary PPE 1. Warning! For example: Crush, pinch, cut, or sever hazard • A hard hat. Hands or fingers can be crushed, pinched, cut, or severed in this area. -
Page 17: Familiarization
Familiarization Log Splitter 4. Familiarization The Skid Pro Attachments WX210-SKD and WX210B-SKD log 4.3 Operator Orientation splitters are designed to split any type of log or wood. When a log or piece of wood aligns with the split bed, an... -
Page 18: Machine Components
WX210-SKD / WX210B-SKD Familiarization Log Splitter 4.4 Machine Components Two hydraulic fluid hoses with fittings are included with the machine, but are not shown in the following illustration. Figure 4 – Machine components (WX210B-SKD shown) 1. Split bed 5. Document storage tube 2. -
Page 19: Controls
WX210-SKD / WX210B-SKD Controls Log Splitter 5. Controls WARNING! Do not operate the machine until you know the location of all the controls and how to use them correctly. Read the Operator's Manual and the mini skid steer manufacturer's manual in full before you operate the machine. -
Page 20: Operating Instructions
WX210-SKD / WX210B-SKD Operating Instructions Log Splitter 6. Operating Instructions The operator is responsible to be familiar with and obey all • Use the machine in a clear location on dry, level ground. operating and safety procedures. Read and understand all... -
Page 21: Machine Break-In
WX210-SKD / WX210B-SKD Operating Instructions Log Splitter 6.4 Start the Machine Items to Complete Remove anything that is entangled on the machine. For WARNING! example, branches or vines. Before you start the machine, read and Make sure that all guards and shields are installed. If necessary, replace the guards or shields. -
Page 22: Split A Log
WX210-SKD / WX210B-SKD Operating Instructions Log Splitter 6.7 Split a Log WARNING! Wear the personal protective equipment (PPE) that is necessary to do the work safely. This includes, but is not limited to, a hard hat, hearing protection, a face shield, protective footwear, a respirator, and heavy gloves. -
Page 23: Remove A Blockage
WX210-SKD / WX210B-SKD Operating Instructions Log Splitter 6.8 Remove a Blockage WARNING! Put the machine in a safe condition before you remove a blockage. Do not reach into the machine when it is not in a safe condition. When the machine is not in a safe condition, there are impact, crush, and sever, hazards that can cause serious injury or death. -
Page 24: Transport
WX210-SKD / WX210B-SKD Transport Log Splitter 7. Transport 7.3 Connect to a Mini Skid Steer IMPORTANT! Equipment that is transported on a public roadway must comply with the local laws that govern the safety and transport of machinery. WARNING! Before taking the machine on a public roadway, make... -
Page 25: Disconnect From A Mini Skid Steer
WX210-SKD / WX210B-SKD Transport Log Splitter 14. Examine the lock pins to make sure that they are through 1. Make sure that the ground is flat and there is a sufficient the attachment plate and the connection is safe. amount of space to safely drive the mini skid steer away from the machine. -
Page 26: Storage
WX210-SKD / WX210B-SKD Storage Log Splitter 8. Storage At the end of the season or when the machine is not going to be 8.3 Remove the Machine from used for an extended length of time, store the machine correctly Storage to prevent damage. -
Page 27: Service And Maintenance
WX210-SKD / WX210B-SKD Service and Maintenance Log Splitter 9. Service and Maintenance Regular preventive maintenance can improve performance and • Follow good shop practices: prolong the life of the machine. Machine maintenance is your • Keep the work area clean and dry. -
Page 28: Maintenance Schedule
WX210-SKD / WX210B-SKD Service and Maintenance Log Splitter 9.3 Maintenance Schedule Complete maintenance tasks at the specified time or hour interval, whichever comes first. 8 hours 100 hours Task or daily or monthly Reference Check that all the fasteners are torqued to See page 31. -
Page 29: Troubleshooting
If you find a problem that is difficult to solve, even after reading this information, please contact Skid Pro Attachments. When you contact someone, please have the serial number of your product available. To find the serial number on your machine, see Serial Number Location on page 5. -
Page 30: Specifications
WX210-SKD / WX210B-SKD Specifications Log Splitter 11. Specifications For available accessories, go to www.skidpro.com. 11.1 Machine Specifications Parameter WX210-SKD WX210B-SKD Mounting Mini skid steer Cylinder diameter 4" (102 mm) Wedge height 9" (23 cm) Cylinder stroke 24" (609 mm) Splitting force... -
Page 31: Bolt Torque
WX210-SKD / WX210B-SKD Specifications Log Splitter 11.3 Bolt Torque IMPORTANT! If you replace hardware, use fasteners of Imperial Bolt Torque Specifications the same grade. Torque Bolt SAE Gr. 2 SAE Gr. 5 SAE Gr. 8 Diameter IMPORTANT! The torque specifications in these tables lbf•ft... -
Page 32: Hydraulic Fitting Torque
WX210-SKD / WX210B-SKD Specifications Log Splitter 11.4 Hydraulic Fitting Torque Hydraulic Fitting Torque Specifications Tighten flare-type tube fittings: Hex size Tube size across Flats from finger 1. Check the flare and flare seat for defects that might flats Torque tight cause leaks. -
Page 33: Accessories
WX210-SKD / WX210B-SKD Accessories Log Splitter 12. Accessories Four-way wedge W4120 Rev Jan-2024 Skid Pro... - Page 34 WX210-SKD / WX210B-SKD Accessories Log Splitter 13. Index Accessories ������������������������������������������������������������������������� 33 New operator����������������������������������������������������������������������� 17 Blockage Operating instructions ��������������������������������������������������������� 20 Remove a blockage ������������������������������������������������������� 23 Emergency stop ������������������������������������������������������������� 21 Machine break-in ����������������������������������������������������������� 21 Operating safety ������������������������������������������������������������ 20 Pre-start checklist ���������������������������������������������������������� 20 Clean the machine ��������������������������������������������������������������...
- Page 35 WX210-SKD / WX210B-SKD Accessories Log Splitter Start the machine ���������������������������������������������������������������� 21 Stop the machine ���������������������������������������������������������������� 21 Storage�������������������������������������������������������������������������������� 26 Put the machine in storage �������������������������������������������� 26 Remove the machine from storage�������������������������������� 26 Storage safety���������������������������������������������������������������� 26 Torque specifications Bolts ������������������������������������������������������������������������������� 31 Hydraulic fittings ������������������������������������������������������������ 32 Training �������������������������������������������������������������������������������...
- Page 36 PO Box 982 Alexandria, MN 56308 Phone: 877-378-4642 Fax: 320-759-1057 www.skidpro.com sales@skidpro.com...
Need help?
Do you have a question about the WX210-SKD and is the answer not in the manual?
Questions and answers