Subscribe to Our Youtube Channel
Related Manuals for Turbo TIC902
Summary of Contents for Turbo TIC902
- Page 1 TIC902 Built-In Ceramic Hob Manual Congratulations on the purchase of your new hob and thank you for choosing us! Please read all the safety instructions carefully before use and keep this Manual for future reference.
-
Page 2: Safety Warnings
Safety Warnings Your safety is important to us. Please read this information before using your cooktop. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on • Connection to a good earth wiring system is essential and mandatory. •... -
Page 3: Health Hazard
Operation and maintenance Electrical Shock Hazard • Do not cook on a broken or cracked cooktop . If the cooktop surface should break or crack, switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician. •... - Page 4 • Never leave any objects or utensils on the appliance. • Never use your appliance for warming or heating the room. • After use, always turn off the cooking zones and the cooktop as described in this manual (i.e. by using the touch controls). •...
-
Page 5: Product Instruction
persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. -
Page 6: Top View
Top View Sepecifications Heating Zone Rating (Rated voltage/voltage range/ Rated Power) Model TIC902 1200W 1700W 230V~,50-60Hz,2900W Touch Control Instruction Control Panel 1,2 -Cooking zone selecting 6,7-Power or timer regulating controls 8-Child lock 9-Timer function 10- Dual ring control 11-ON/OFF control... -
Page 7: Production Operation
Production Operation Touch Controls • The controls respond to touch, so you don't need to apply any pressure. • Use the ball of your finger, not its tip. • You will hear a beep each time a touch is registered. •... -
Page 8: To Start Cooking
To start cooking • After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that the ceramic hob has entered the state of standby mode. 1. Touch the ON/OFF control. After power on, the buzzer beeps once, all displays show"... -
Page 9: When You Have Finished Cooking
Dual ring function 1. select the zone with dual ring, set the power level（1-9）by “+” or “-”, press the to activate. to cancel the multi ring, select the zone, and then press the When you have finished cooking 1. Touching the heating zone selection control that you wish to switch off. -
Page 10: Using The Timer As A Minute Minder
Using the Timer You can use the timer in two different ways: • You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time isup. • You can set it to turn one cooking zone off after the set time is up. •... -
Page 11: Setting The Timer To Turn One Cooking Zone Off
Setting the timer to turn one cooking zone off Touching the heating zone selection control. 2. Touch timer control , The minder indicator will start flashing and "30" will show in the timer display. 3. Set the time by touching the or control of the timer Hint: Touch the control of the timer... -
Page 12: Locking The Controls
If the timer is set on more than onezone: When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking zones are on. The minute display shows the min. timer. The dot of the corresponding zone flashes (set to 15 minutes) (set to 45 minutes) 2. -
Page 13: Heat Settings
hob. When an excessive temperature is monitored, the ceramic hob will stop operation automatically. Residual Heat Warning When the hob has been operating for some time,there will be some residual heat.The letter " H " appears to warn you to keep away from it. to Shutdown Another safety feature of the hob is auto shutdown.This occurs whenever you forget to switch off a cooking zone.The default shutdown times are shown in... -
Page 14: Cleaning And Maintenance
Cleaning and Maintenance Important: Before any maintenance or cleaning work is carried out, disconnect the appliance from electricity supply and ensure the appliances is completely cool. Cleaning the Hob Surface Clean spillages from the hob surface as soon as possible after use. Always ensure the surface is cool enough before cleaning. - Page 15 A(mm) B(mm) C(mm) 760 min 50 min 20 min Air intake 50mm Air exit 50mm Make sure the induction cooker hob is well ventilated and that air inlet and outlet are not blocked. In order to avoid accidental touch with the overheating bottom of the hob, or getting un-expectable electric shock during working, it is necessary to put a wooden insert, fixed by screws, at a minimum distance of 50mm from the bottom of the hob.
- Page 16 1. The induction hotplate must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by yourself. 2. The hob will not be installed directly above a dishwasher, fridge, freezer washing machine or clothes dryer, as the humidity may damage the hob electronics. 3.
- Page 17 Attention the cable is damaged or needs replacing, this should be done by an after- sales technician using the proper tools, so as to avoid any accidents. the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be installed with a minimum gap of 3mm between the contacts.
Need help?
Do you have a question about the TIC902 and is the answer not in the manual?
Questions and answers