Page 9
功能及操作说明 PRE MODE(前级模式) PRE MODE为输出接口的音量调节功能开关: VARIABLE:输出接口音量是受控的。 FIXED:输出接口音量是固定的。 MODE KEY FOR (MODE按键作用) SWITCH LINE/HPA(线路与耳放输出切换) OUTPUTS (输出选择) BLUETOOTH (切换到蓝牙输入) PHASE (切换到输出相位) DPLL设置: MIN ~ MAX (共15种, 默认为5.数字越大适应抖动的范围越强,数字越小抗时钟抖动的性能或好。 ) 这个DPLL设定是ESS系列产品特有的功能,它可以调整芯片内部DPLL数字锁相环 电路的带宽,使芯片在抗时钟抖动和输入宽容度之间达到一个平衡。 它的作用: 在输入信号的时钟稳定度好的情况,可以减小这个值,这样系统的时钟性能更佳; 在输入信号的时钟稳定度不好的情况下,声音有可能会有中断的现象,增大这个值 可以避免声音中断现象的发生!特别是使用电视作为信号源时。...
Page 10
功能及操作说明 模式: NORMAL ( 正相位 ) REVERSED ( 反相位 ) S DATA + S DATA - S DATA - S DATA + S BCK + S BCK + S BCK - S BCK - S LRCLK + S LRCLK - S LRCLK - S LRCLK + S MCLK +...
Page 13
Instruction manual The contents of this manual may change with the version, if there is any change without notice, please go to http:/ /www.loxjie-audio.com/download.asp Download the latest version of the manual. Ver 1.1...
Page 14
Features Support MQA decoding and MQA-CD; New 3rd generation XMOS XU-316, PCM support up to 32bit/768kHz, DSD support to DSD512; The new generation flagship DAC chip ES9039MSPRO of USA ESS has built-in MQA hard decoding; Fully balanced earphone design with high power output, up to 6W at 16 ohms and 3W ,at 32 ohms.
Volume - How to use Bluetooth: Connection: switch the input source to Bluetooth, turn on the Bluetooth function of the mobile phone, search "LOXJIE D60", and click Connect after searching. When the mobile phone displays "connected", the connection is successful.
Page 18
Parts Display screen Bluetooth antenna Remote window Balanced headphone jack Indicator light AES/EBU input Function knob I²S input 4.4mm headphone jack Optical input 6.35mm headphone jack Coaxial input RCA output USB input XLR output AC IN(100~240V AC)
Page 19
Function and operation instructions INPUT: COAX OUTPUT: PCM FILTER: FILTER OFF MINIMUM PHASE APODIZING LINEAR FAST LINEAR SLOW MINIMUM FAST MINIMUM SLOW LOW DISPERSION...
Page 20
DSD FILTER GAIN 47k CUT-OFF 50k CUT-OFF HIGH 60k CUT-OFF 70k CUT-OFF SOUND COLOR This machine has a total of 9 tone modes, which are processed by DSP through DAC, which are: Rich1, Rich2, Rich3 Tube1, Tube2, Tube3 Crystal1, Crystal2, Crystal3 This setting is usingthe DSP of DAC, to make some different sound color, all of these settings will not change the frequency res ponse curve.When set to "Standard", this setting will be bypassed.
Page 21
Function and operation instructions PRE MODE PRE MODE is the volume adjustment function switch for the output interface. VARIABLE: The output interface volume is controlled. FIXED: The output interface volume is fixed. MODE KEY FOR SWITCH LINE/HPA OUTPUTS BLUETOOTH PHASE DPLL MIN ~ MAX (A total of 15 kinds, the default is 5 kinds.
Page 22
Function and operation instructions setting NORMAL REVERSED S DATA + S DATA - S DATA - S DATA + S BCK + S BCK + S BCK - S BCK - S LRCLK - S LRCLK + S LRCLK - S LRCLK + S MCLK + S MCLK +...
Page 23
During Bluetooth input, long press the middle button of the knob, the system will only reset the Bluetooth pairing status; F or other inputs (not Bluetooth), select "RESET" from the D60's main menu and confirm, the system will clear all settings, including Bluetooth.
Page 24
The master MQA file is fully authenticated and is small enough to stream or download. The D60 includes MQA technology, which enables you to playback MQA audio files and streams, delivering the sound of the original master recording.
Need help?
Do you have a question about the D60 and is the answer not in the manual?
Questions and answers