Summary of Contents for Sevio R600
- Page 1 SEVIO R600 Installation guide Document ID: r600_installation_guide_en_v23_09 https://sevio.it/...
-
Page 2: Legal Information
Legal information The content of this document is provided "as-is". No warranties of any kind related to the content of this document are provided. Sevio reserves the right to review this document or withdraw it at any time without any notice. -
Page 3: Table Of Contents
Version history..............................2 Safety................................4 Regulatory Notices............................5 Installation Countries............................6 Warranty................................6 Care recommendations............................. 7 General Description............................8 Package content............................... 9 Product Identification and Version Information....................9 Mechanical Installation............................ 10 Electrical Installation............................12 Status................................18 Configuration..............................19 Document ID: r600_installation_guide_en_v23_09 https://sevio.it/... -
Page 4: Safety
Read this manual completely and gather all information on the device. Make sure that you understand it fully. Check that your application does not exceed the safe operating specifications for this device. Before installation This device can only be installed by qualified personnel. Document ID: r600_installation_guide_en_v23_09 https://sevio.it/... -
Page 5: Regulatory Notices
Regulatory Notices Simplified EU declaration of conformity Hereby, Sevio declares that the equipment is in compliance with EU directives. The full EU declaration of conformity and other detailed information are available at the respective product page at https://sevio.it. United States (FCC) FCC Compliance Statement The enclosed device complies with Part 15 of the FCC Rules. -
Page 6: Agency Approvals And Standards Compliance
Warranty Any guarantee claim must be received before the end of the 2 years guarantee period and is to be enclosed with the returned claimed defective product within this same period, and must include Sevio return authorization number (RM No.). -
Page 7: Care Recommendations
Do not use or store the device in dusty, dirty areas, connectors as well as other mechanical parts may be damaged. If the device is not working properly, contact the place of purchase, nearest Sevio distributor office or Sevio technical support. -
Page 8: General Description
It is mainly used as a network segment to isolate WAN and LAN networks. It offers Ethernet and serial, CAN bus interfaces (only for R600-RC) on the industrial automation side; while on the Networking side it provides Ethernet, Wi-Fi and cellular interfaces. -
Page 9: Package Content
Package content The package contents of following main components: 1 Sevio router (R600 or R600-SC or R600-POE or R600-SC-POE) 1 power terminal block connector 1 Wi-Fi antenna 1 quick guide If any components are missing or damaged or if you have any questions regarding the contents, contact us at support@sevio.it. -
Page 10: Mechanical Installation
Approx. 220 x 150 x 100 mm Enclosure Aluminum Weight 400 g IP Protection IP30 Mechanical drawings files are available at https://sevio.it Environmental Operating temperature -20 °C to 55 °C Storage and transport temperature -40 °C to 85 °C Operating humidity 10% to 90% RH... - Page 11 The top of the hook must first be set on the DIN rail. Then just press down (step 1) and at the same time rotate the device until it is flush with the rail (step 2). Finally release the force on the spring and check that it gets properly seated. Document ID: r600_installation_guide_en_v23_09 https://sevio.it/...
-
Page 12: Electrical Installation
Idle power 2.5 W Idle CPU, no ports connected Note: The equipment shall be supplied by ES1/SELV power sources according to IEC/EN 62368-1, protected by a 3.15 A fuse. Transient voltage has been considered as 1500 Vpeak. Document ID: r600_installation_guide_en_v23_09 https://sevio.it/... - Page 13 DI [1÷2] input low threshold 3.0 Vdc DI [1÷2] input high threshold 4.5 Vdc DI max frequency 8 kHz DO [1÷2] output voltage IO V+ DO [1÷2] output current 300 mA @ V+ = 24 V Document ID: r600_installation_guide_en_v23_09 https://sevio.it/...
- Page 14 Wiring the Digital Inputs (DI) and Digital Outputs (DO) V+ IO I 1÷2 Input V- IO O1÷2 Load PNP Input connection PNP Output connection Document ID: r600_installation_guide_en_v23_09 https://sevio.it/...
-
Page 15: Ethernet Interface
LAN 2 LAN 1 Connector type RJ-45 shielded Cable type CAT 5e or better, shielded Autonegotiation Auto MDI/MDI-X Speed 10 Mbit/s, 100 Mbit/s, 1000 Mbit/s (except WAN port) Duplex Full, Half Transmission distance max. 110 m Document ID: r600_installation_guide_en_v23_09 https://sevio.it/... - Page 16 Wi-Fi Interface SEVIO R600 is a radio device operating at 2.4 GHz WLAN bands, and configurable either as Access Point or Client. The web server or Sevio Portal, the web application for the Sevio system, can be used to configure and view the status of the Wi-Fi interface.
- Page 17 Port Type Connector Max. Current Used for M100 M100 A + lock 2100 mA connection Configure the Sevio Router when offline USB1 500 mA through a properly set USB flash drive USB2 Micro AB 500 mA Reserved All ports are protected from overcurrent and short circuit.
-
Page 18: Status
Session locked Wi-Fi disabled GREEN Wi-Fi is enabled AMBER Wi-Fi authentication is failing µSD is not inserted GREEN µSD is ready to eject AMBER µSD is in read/write mode GREEN Activity LED AMBER Connection speed LED Document ID: r600_installation_guide_en_v23_09 https://sevio.it/... -
Page 19: Configuration
Configuration The device is configurable via web server or Sevio Portal, the web application accessible via any updated web browser: 1. Open https://sevio.it/ and click on Sevio Portal in your web browser. 2. If you already have an account just log in as usual and add this new device to your list of devices, otherwise register a new account following the instructions in Sevio Portal. - Page 20 Sevio Srl - Via della Pusterla, 36 Misinto (MB) - IT Ph. +39 02 97070785 Customer service: support@sevio.it Sales department: sales@sevio.it https://sevio.it/ Document ID: r600_installation_guide_en_v23_09 https://sevio.it/...
Need help?
Do you have a question about the R600 and is the answer not in the manual?
Questions and answers