Aiphone GF-NS Operation Manual

GF-NS.E MANUAL E TH 0402 (A)
DIGITAL NAME SCROLLING APARTMENT INTERCOM SYSTEM
OPERATION MANUAL
PRECAUTIONS_
/j\ WARNING
(Negligence could lesuii in death
01
serious injury
to people.)
1. This device is electrical. Wiring must be done /T\
by qualified personnel.
2. Do not modify or alter the equipment. pSf\
3. Do not open GF-NS/GF-1 OK case.
/j\ CAUTION
(Negligence couia result in injury to people oi
damage to property.)
1. GF-NS/GF-10K are weather resistant. However, do not /S
spray high pressure water directly onto it by hose, etc.
GENERAL PRECAUTIONS
1. GF system is not operable during a power failure.
2. In areas where broadcasting station antennas are
close by, intercom system may be affected by
radio frequency interference.
General Prohibitions
Prohibitions to subject
the unit to water
Prohibitions to
dismantle the unit
1 NAMES & FUNCTIONS
I_l
X A VO
O Q OO
GF-NS, Name scroll module
1. LCD display
2. S3 CANCEL (or decide & back)
3. A SCROLL backward or move cursor to left
4. V SCROLL forward or move cursor to right
5. 0 CALL (or decide & next)
GF-10K
© © ®
(J) (5) (P)
VW
(X) (E) m
© ®
GF-10K, Digital keypad module
6. Digital keypad (1 ~ 0, ^ #)
When entering letters; A~Z, 0 = [, ][-][-][/][
Functions: • Dialing Room #
• Door release by entering Access code
• Name search with ©key and calling
2 PROGRAMMING
Programming by PC
6666
/
— Cable
GF-NS (supplied)
1 It is possible to write or change resident names from
your PC, making data input.
1 Download Programming & Alteration Method from
Aiphone's Web Site: http://www.aiphone.com/
1 Connect your PC with GF-NS in conjunction with the
connecting cable supplied with GF-NS.
Programming by GF-NS & GF-10K
• On LCD display, see a message
"WELCOME"
to confirm system is in standby.
• Prior to programming, it is suggested to have
your own ID code newly registered, so that any
other person cannot get into the system.
-►
Go to P.2
• Firstly, enter program mode.
In case your programmed ID code is forgotten,
Go to P.4