Extec C-10 Safe Operating Procedures

Safe Operating Procedure
EXTEC C-10 Crusher
DO NOT use this equipment unless you have been instructed in its safe use and operation and given prior permission.
PERSONAL PROTECTIVE EQUIPMENT
FOOT HEAD
PROTECTION PROTECTION
MUST BE WORN MUST BE WORN
WARNINGS AND DANGERS
DO NOT ELECTRICAL DO NOT STORE
COMPONENTS DUE TO POTENTIALLY HARMFUL
HIGH VOLTAGE WAIT AT WASTE ESPECIALLY IN
LEAST 10 SECONDS FOOD OR BEVERAGE
AFTER E-STOP TO CONTAINERS
RELEASE ELECTRICAL
CHARGE
NO DO NOT
CLIMBING WELD
DURING OPERATION DURING OPERATION
PRE-OPERATIONAL SAFETY CHECKS
Read Operators Manual and Risk assessment.
DO NOT attempt to start this machine until you are
aware of ALL aspects of its operation.
Always observe all safety instructions and warnings
attached to the plant.
Date of last review
This SOP does not necessarily cover all possible hazards associated with this equipment or procedure and should be used in conjunction with other
references. It is designed as a guide to be used to compliment training and as a reminder to users prior to use.
WEAR HIGH WORKWEAR
VISIBILITY VEST TO
OR CLOTHING BE WORN
DISCONNECT POWER AVOID CONTACT
SOURCE FROM SUPPLY WITH OVERHEAD POWER
LINES – DO NOT TOUCH
PRIOR TO CONDUCTING
MAINTENANCE EQUIPMENT AND
VACATE AREA BEFORE
HAVING POWER LINE
SHUT OFF
NO
DO NOT REMOVE
SMOKING
SAFETY GUARD
Name
SOP – EXTEC C-10 Crusher © Ver 1.0 1119 valid until 11/2021
WEAR HAND WEAR HEARING AND
PROTECTION EYE PROTECTION
WHEN REQUIRED WHEN REQUIRED
SWITCH OFF AND BREATHING OR
LOCKOUT PLANT INHALING INCLUDING
BEFORE CONDUCTING SILICA DUST
MAINTENANCE OR PARTICLES WILL
ADJUSTMENTS CAUSE DEATH OR
SERIOUS INJURY
NO RINGS OR
NO
JEWELERY
OPEN FLAMES
Ensure area around the machine is clear of bystanders
& obstructions.
Ear protection is compulsory within 10 meters of the
machine when the engine and all other parts of the
machine are running.
Ensure there is overhead power lines which can
interfere with the machine operating range and operator
safety.
Take the necessary precautions to ensure that the plant
is used only when in a safe and reliable state.
Check that the machine is in good mechanical condition
and that there is no component damage or loss.
Operate the plant only for it's designed purpose and
only if all guarding, protective and safety orientated
devices, emergency shut-off equipment, sound proofing
elements and exhausts, are in all place and fully
functional.
Ensure that crusher chamber, feeder and conveyor
belts are free of material.
Signature
WEAR A WEAR A
DUST MASK
RESPIRATOR
WHEN REQUIRED
WHEN REQUIRED
LOOSE CLOTHING AND FLYING AND FALLING
DEBRIS
HAIR OR BODY PARTS
CAN GET CAUGHT IN
RUNNING MACHINERY
WHICH WILL RESULT IN
DEATH OR SERIOUS
INJURY
DO NOT POUR
WASTE ONTO THE
LIMITED
GROUND, DOWN A
OR
DRAIN OR INTO ANY
RESTRICTED ACCESS
WATER SOURCE.