Table of Contents
Advertisement
eCAFE EC-1000W
An information window displays in your eCAFÉ™'s status bar, enabling you to view the network
connection. Then, launch your Internet browser.
3.6.3. Determining the connection status
The eCAFÉ™ Connect icon appears in the notification area. It provides updated information about the
connection's status:
Internet connection: an Ethernet or WiFi
peripheral is active and physically
connected; Internet access is available.
Local area connection: an Ethernet or
WiFi peripheral is active and physically
connected; no Internet access is
available.
Connection problem: an Ethernet or
WiFi peripheral is active and physically
connected; no Internet access is
available.
No connection: an Ethernet or WiFi
device is active but is not connected
physically.
No peripheral: no Ethernet and/or WiFi
peripheral have been activated.
28/46 – User Manual
Your Internet connection is perfectly operational.
You are connected to a modem, a router or an
Internet box or to a corporate network; however, this
device or network is not connected to the Internet.
Please check the Internet connection settings on
your local area network or your modem.
Please check your network connection settings (IP
address, subnet mask etc.) on your local area
network or your modem. If necessary, contact your
router's or modem/router's vendor.
Connect your eCAFÉ™ to a local area network via
the WiFi connection (please refer to the previous
section) or via the Ethernet port.
Activate your peripheral: to activate your WiFi
peripheral, push the
front of eCAFÉ™, then release it.
button at the
Advertisement
Table of Contents
