mailcoms Mailsend Lite Quick Installation Manual

Mailsend Lite
Quick Installation Guide
1
Before you begin
Register for Your Account
Before you begin installing your new Mailsend Lite,
you need to register for Your Account. To register
for Your Account you will need your account
number and serial number that can be found on
your welcome email or by contacting Mailcoms.
Choose how to connect to the internet
Decide what type of connection (wired or wireless) you wish to use.
Wired Connection
• Takes about 10 minutes to set up
• Requires access to a network port and power outlet.
Wireless connection
• Takes about 15 minutes to set up
• Requires access to a wireless network (router) and power outlet.
• Require a wireless network name and password
Get to know your device
Scale
(weigh vertically or flat)
Touchscreen
Ink cartridge
access -
ink cover
Insert envelopes straight in.
Please unfold this leaflet fully and carefully follow the
installation instructions (Steps 2-5).
2
Here's a diagram and
an explanation of the items
you should find in your box.
Power Cord LAN/ Internet Cable
Ink Cartridge Tape Sheets
3
a. Remove all packing materials from the device.
Registering for
Your Account
pb.com/uk/register
b. Open the ink cover and remove the orange protector.
Do not install the ink cartridge until you are prompted via the
screen.
USB
access
door
c. Close the ink cover.
Power Button
Mailsend Lite
Scale Scale Stand
4
a. Connect to a power source.
b. Press the power button.
5
Follow the on screen prompts.
See the back of this leaflet for more useful information
about your Mailsend Lite from the Quick Start Guide.