Summary of Contents for SITETEC P2000EG650
- Page 1 Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl Manual Pumping unit P2000EG650...
- Page 2 MONTHLY MAINTENANCE 3 MONTH MAINTENANCE 6 MONTH MAINTENANCE OIL CHANGE INTERVALS DEMOBILISATION LONG-TERM STORAGE PARTS SUPPLY AND RECOMMENDED PARTS STOCKLIST PARTS & SERVICE HOTLINE OF SITETEC EQUIPMENT SUPPLY COMPANY ATTACHMENTS: STARTPROCEDURE PERFORMANCE CHART PUMP MANUAL ENGINE MANUAL ELECTRIC PLANS MAINTENANCE REGISTRATION...
- Page 3 +31 343 595 400 www.sitetec.nl | info@sitetec.nl MOBILISATION The weight of the P2000EG650 is approx. 21.000kg. Prior to lifting the pump unit a few checks must be made: 1. check if all stored articles inside the pump unit are securely tied down 2.
- Page 4 Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl OVERALL CHECK OF THE PUMPUNIT Before you can start pumping there are a several checks to be made: 1. Check electric power supply, switch-on indoor lights, check on/off of the liner wash pump.
- Page 5 Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl CHECK BEFORE STARTING THE PUMPUNIT Before starting the pump unit you must do a quick check of all components of the pump unit: 1. Check the pump 2.
- Page 6 Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl During operation frequently check: Liner wash liquid level visually Pump general inspection High pressure hose ad connections Suction hose and connections OPERATING THE PUMPUNIT When the pump unit is in service the responsible operator has to keep checking all items discussed in chapter 1.3 and 2.1 on a regular basis.
- Page 7 Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl WORKING ON THE PUMP AND EXCHANGING PARTS Before you start working on the pump idle the engine for 5 minutes then stop it. Before you start working on the pump close all valves.
-
Page 8: Weekly Maintenance
Molenvliet 28 3961 MV Wijk bij Duurstede +31 343 595 400 www.sitetec.nl | info@sitetec.nl 20. reassemble the liner wash manifold 21. reassemble the valves as described above in ‘if you have a valve problem’ 22. drain liner wash water, clean the system and fill up with clean water 12 HOUR SHIFT MAINTENANCE The maintenance on the pump unit for a 12 hour shift is running through all the points discussed in chapter 1.3 thru 2.4. -
Page 9: 6 Month Maintenance
DRAIN WATER OUT OF DIESELTANK AT LEAST ONCE A YEAR DEMOBILISATION The weight of the P2000EG650 is approx. 21.000kg. Prior to lifting the pump unit a few handlings must be made: 1. check if all stored articles inside the pump unit are securely tied down 2. -
Page 10: Long Term Storage
To make sure all your wear parts are available you have to stock your parts on-site. We therefore made a list of the parts and quantities of all wear parts for a normal period. If parts are used it is necessary to refill your stock immediately. !!! USE GENIUNE PARTS SUPPLIED BY SITETEC ONLY !!!
Need help?
Do you have a question about the P2000EG650 and is the answer not in the manual?
Questions and answers