Solight CA06 Instruction Manual

EN CA06
Clock with Qi wireless charging
Thank you for purchasing our equipment. Please read this manual carefully and heed the safety warnings and
instructions before installing, using or repairing the equipment. This will ensure not only the protection of persons, but
also the long life of the equipment.
D ES C R IP T IO N O F EQ U IP M EN T
A. Automatic brightness symbol
C. Date
E. Relative humidity
G. Battery compartment cover
I. Button MEM
K. Button +
M. Settings button
O. Light/snooze button
Q. Light sensor
B A S IC IN FO R M A T IO N
- The wireless charger charges all devices that meet the Qi wireless charging standard
- Wireless charging power is max. 10W
- High resolution LCD display
- Calendar to 2099
- Optional time display 12/24h
- Daily and Mon-Fri point with recurring wake-up function
- Temperature units in °C/°F
- Temperature measurement ranges: -9.9°C (14.2°F) ~ 50°C (122°F)
- Humidity measurement ranges: 20-95%
- Power: CR2032 battery (3V) for fast charging QC 3.0 charging standard is required
FIR S T CO N SE CR A T IO N
1. Open the battery compartment cover, insert the CR2032 battery and observe the polarity (+ | -), if there is an
insulating foil on the battery, remove it.
2. Insert the USB TYP-C data charging cable into the connector on the back of the device, and plug the other end into
the USB-A output port of the adapter (QC 3.0 standard must be provided).
3. The device will start working normally.
T IM E S E T T IN G
- Press the button to select the 12/24 hour time display format (If you select the 12h format, PM (Post Meridiem)
will be displayed before HOUR.
- To set the exact time, press and hold the
Use the +/- buttons to set the desired hour. Press the
setting.
Setting sequence: HOURS MINUTES YEAR MONTH DATA format - D/M or M/D.
For faster adjustment, the + /- buttons can be held down until the desired value is displayed.
Press the button to confirm the settings and return to the standard time display.
NOTE: If no action is taken within 20 seconds, the device will automatically return to the standard time display.
B. Time
D. Temperature
F. Wireless charging symbol
H. Power input socket (type C)
J. Button -
L. Alarm button
N. Off/on switch Alarm switch
P. Wireless power supply area
button (for about 2 seconds) until the HOURS starts flashing.
button again to confirm the setting and move on to the next