Related Manuals for Defender 3K Plus Guard Pro
Summary of Contents for Defender 3K Plus Guard Pro
- Page 1 QUICK START GUIDE ATTENTION! For Returns or Support you MUST contact DefenderCameras.com/Support...
-
Page 2: Table Of Contents
TABLE OF CONTENTS WHAT’S INCLUDED ....................4 WHAT YOU’LL NEED ....................5 REGULATORY INFORMATION ................. 5 PRODUCT DETAILS ....................6 LET’S GET STARTED ....................7 SETTING UP YOUR CAMERA ..................8 CAMERA MOUNTING OPTIONS ................11 USING THE APP ...................... 11 FREQUENTLY ASKED QUESTIONS ................. - Page 3 ACTIVATE YOUR WARRANTY PROTECT SUPPORT VALUE Covered for the Receive videos, tips & Exclusive access to unexpected updates for your product special offers Open your camera & scan this QR code, or visit: DefenderCameras.com/Warranty EXTEND YOUR WARRANTY Don’t forget to protect your purchase and ease your mind by extending your included 1 year manufacturer warranty to 2 or 3 years.
-
Page 4: What's Included
WHAT’S INCLUDED WHAT YOU’LL NEED 3K Guard Pro PTZ Dual-Lens Camera Wi-Fi Internet Connection Camera Power Supply (10ft) Drill and/or a Phillips #2 screwdriver Camera Power Extension Cable (25ft) 3/32” drill bit for pilot holes Camera Mounting Hardware 7/32” drill bit for wall anchors Camera Mounting Template 7/8”... -
Page 5: Product Details
PRODUCT DETAILS Ethernet Cable Connector Wi-Fi Antenna (Optional for hard wire connection) LED Indicator Power Adapter Connector Micro SD Card Slot Built-in Mic (Remove cover to access) Spot Light QR Code Reset Button RESET 10 s Speaker... -
Page 6: Let's Get Started
IMPORTANT: Screenshots and some steps may vary based on the device used to step up the App. 1: Download the App Download the Defender Guard app and follow the steps to create an account. An email account is required for verification. 2. Plug-In Your Camera to Power On Before connecting your camera to the App, wait 60 seconds for the LED indicator light to flash green. -
Page 7: Setting Up Your Camera
SETTING UP YOUR CAMERA Step 1: Connect to Wi-Fi and Pair Your Camera IMPORTANT: Before pairing, ensure your phone is connected to a 2.4 GHz Wi-Fi network Tap + to add your camera, then Ensure Bluetooth is turned on tap Scan QR code. your phone and tap Next. - Page 8 Select the Wi-Fi network you want Please wait while the device to connect your camera with. Only connects to the server. available 2.4 GHz Wi-Fi networks Note: Make sure your phone is show here. Enter your Wi-Fi Network connected to the same network. password then tap “Next”.
-
Page 9: Step 2: Insert A Micro Sd Card
Step 2: Insert A Micro Sd Card Recordings can be locally stored on a Micro SD card, to insert or swap out your Micro SD card please follow the steps below. The maximum size Micro SD card is 256GB. 1. Remove the lower cover by unscrewing the Philips screws to access the SD card. 2. - Page 10 Step 3: Position and Install Your Camera IMPORTANT: Before mounting your camera, use the app to test your Wi-Fi strength and video feed. Plug the camera in the area you’ll be monitoring and view your footage to ensure you have a clear, uninterrupted view.
-
Page 11: Camera Mounting Options
× 1 × 4 × 4 × 4 × 4 USING THE APP The Defender Guard App allows you to remotely view live video or playback recorded footage, save and share recordings, share App access and more. Scan the QR Code! -
Page 12: Frequently Asked Questions
HOW MANY CAMERAS CAN I CONNECT TO THE DEFENDER GUARD APP? You can connect a total of 16 cameras to the Defender Guard App and view up to 4 cameras at once. We recommend no more than 6 Guard/Guard Pro/Guard Pro PTZ/ 4K Guard Pro cameras be connected in the same home/building to avoid interference issues. - Page 13 DEFENDER® product is in use by the purchaser. We reserve the right to change models, configuration, or specifications without notice or liability. Product...
Need help?
Do you have a question about the 3K Plus Guard Pro and is the answer not in the manual?
Questions and answers