Subscribe to Our Youtube Channel
Related Manuals for Beacon KV100/1 W
Summary of Contents for Beacon KV100/1 W
- Page 1 Operating Instructions KV100/1 & KV100/2 W/D Wet & Dry Industrial Vacuum Cleaners Original Instructions Please read carefully before use...
-
Page 2: Important User Information
Under no circumstances should you attempt to repair this vacuum cleaner yourself. Repairs undertaken by unauthorised or inexperienced persons may cause injury and/or serious malfunctioning. This machine should be serviced by authorized BEACON personnel and only genuine BEACON spare parts should be used. -
Page 3: Electrical Information
ELECTRICAL INFORMATION Cable & Plug These Wet & Dry Cleaners are earthed appliances and have 10 metres of 3 core supply cable with a moulded on impact resistant 13amp 3 pin UK plug. The fuse fitted is approved and rated at 13amps. Only 13amps fuses must be used. -
Page 4: Unpacking Your Vacuum Cleaner
UNPACKING YOUR VACUUM CLEANER Unpack your cleaner and ensure that you have the spares and accessories as listed on the delivery note. NOTE: This range of industrial Wet & Dry vacuum cleaners has a hose entry which will accept 32, 38 and 51mm diameter hoses. -
Page 5: Cleaning The Filters
INSTRUCTIONS FOR USE OF ALL KERSTAR WET & DRY VACUUM CLEANERS This machine can be used to pick up water (WET) OR to pick up general dust, dirt etc. (DRY). To set up for wet use Remove motor head Remove dry filter asssembly Make sure the canister is empty and clean Place the float assembly in the canister Replace motor head –... -
Page 6: Loss Of Suction
BEACON directly: Tel: +44 (0)1536 762 939 Please make a note of the model and serial number before contacting your dealer or BEACON. GUARANTEE BEACON products are guaranteed for 12 months against defective parts and workmanship. There are certain conditions that may invalidate this guarantee. - Page 7 Vacuum motor head 2nd stage Filter assembly Float assembly 1st stage Permaflow filter Net filter...
- Page 8 KV 100/1 WP, KV 100/2 WP Serial No.: See unit Beacon International UK declare under our sole responsibility as the manufacturer that the above object(s)/products are in conformity with the following relevant legislation and designated standards: The machinery also Supply of Machinery (Safety) Regulations 2008; Electromagnetic Compatibility conforms to the following Regulations 2016;...
- Page 9 Serial No.: See unit Beacon International Limited declare under our sole responsibility as the manufacturer that the above object(s)/products are in conformity with the following relevant Union harmonisation legislation. The machinery conforms to all the requirements of the Machinery Directive 2006/42/EC.
- Page 10 NOTES...
- Page 11 NOTES...
- Page 12 Although every effort has been made to maintain accuracy of information and specifications in this procure, no liability can be accepted for errors and omissions and this brochure forms no part of a contract. Beacon International Ltd. May introduce modifications and improvements from time to time, and consequently the details given in this leaflet are...
Need help?
Do you have a question about the KV100/1 W and is the answer not in the manual?
Questions and answers