Gigabyte GA-EP45-UD3 User Manual page 51

Delay For HDD (Secs)
Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up. The
adjustable range is from 0 to 15 seconds. (Default: 0)
Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled
displays normal POST message. (Default: Enabled)
Dual BIOS Recovery Source
If the main BIOS is corrupted, selects whether to recover the BIOS from the backup BIOS or from
the HPA in the hard drive. (Default: HPA)
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI
Express graphics card.
PCI Sets the PCI graphics card as the first display. (Default)
PEG Sets PCI Express graphics card as the first display.
- 51 - BIOS Setup