1. Manuals
  2. Brands
  3. The Original Pink Box Manuals
  4. Drill
  5. PB20VLID
  6. Instruction manual

The Original Pink Box PB20VLID Instruction Manual

20 volt brushless drill
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
I N S T R U C T I O N M A N U A L
20 Volt Brushless Drill
Part Number: PB20VLID
IMPORTANT:
Compatible Batteries: PB20VLIB2 Battery (2.0 Ah)
& PB20VLIB4 Battery (4.0 Ah)
www.theoriginalpinkbox.com
Read before using.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PB20VLID and is the answer not in the manual?

Questions and answers

Summary of Contents for The Original Pink Box PB20VLID

  • Page 1 I N S T R U C T I O N M A N U A L 20 Volt Brushless Drill Part Number: PB20VLID IMPORTANT: Read before using. Compatible Batteries: PB20VLIB2 Battery (2.0 Ah) & PB20VLIB4 Battery (4.0 Ah) www.theoriginalpinkbox.com...

  • Page 2: Specifications

    SPECIFICATIONS Model: PB20VLID Max Torque Gears Adjustable Torque Settings High (2) No load speed (RPM) Low (1) Chuck Capacity Rated voltage Standard battery cartridge (not included) PB20VLIB2 (2.0 Ah Battery) or PB20VLIB4 (4.0 Ah Battery) Net weight 2.65 LB Do not expose power tools to rain or wet con- SAFETY WARNINGS ditions.

  • Page 3: Cordless Driver Drill Safety Warnings

    Do not overreach. Keep proper footing and Service balance at all times. This enables better control of the power tool in unexpected situations. repair person using only identical replacement Dress properly. Do not wear loose clothing or parts. This will ensure that the safety of the power jewellery.

  • Page 4: Functional Description

    CAUTION: Always install the battery cartridge damage. It will also void the The Original Pink Box warranty for the fully . If not, it may accidentally fall out of the tool, 20V tool and charger.

  • Page 5: Overheat Protection

    Overheat protection When the tool/battery is overheated, the tool stops automatically. In this situation, let the tool/battery cool before turning the tool on again. Indicating the remaining battery Overdischarge protection capacity When the battery capacity is not enough, the tool stops automatically.

  • Page 6: Speed Change

    This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for coun- terclockwise rotation. When the reversing switch lever is in the neutral posi- Lighting up the front lamp tion, the switch trigger cannot be pulled.

  • Page 7: Adjusting The Fastening Torque

    Adjusting the fastening torque ► 1. Adjusting ring 2. Graduation 3. Arrow The fastening torque can be adjusted in 19 levels by turning the adjusting ring. Align the graduations with the arrow on the tool body. You can get the minimum fastening torque at 1 and maximum torque at marking.

  • Page 8: Maintenance

    Drilling in metal To prevent the drill bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled. Place the point of the drill bit in the indentation and start drilling. OPERATION Use a cutting lubricant when drilling metals.

Table of Contents