Table of Contents
Advertisement
Chapter 1 Introduction
Features Summary
Form Factor
Motherboard
CPU
Chipset
Memory
I/O Control
Slots
On-Board IDE
On-Board Peripherals
Due to (Intel 845PE/GE/GV) chipset architecture limitation, DDR 333 memory module is
only supported when using FSB 533 Pentium 4 processor. A FSB 400 Pentium 4 processor
will only support DDR 266 memory module
* For GA-8PE667 Pro Only. ** For GA-8PE667 Ultra Only.
30.5cm x 24.4cm ATX size form factor, 4 layers PCB.
GA-8PE667 Series Motherboard:
GA-8PE667 Ultra and GA-8PE667 Pro
Socket 478 for Intel
Micro FC-PGA2 Pentium
®
Intel Pentium
4 533MHz/400MHz FSB
®
Support Intel
Pentium
®
®
Support Intel
Pentium
®
®
2nd cache depend on CPU
Chipset 845PE HOST/AGP/Controller
ICH4 I/O Controller Hub
3 184-pin DDR DIMM sockets
Supports DDR333/DDR266 DDR DIMM
Supports up to 2GB DRAM (Max)
Supports only 2.5V DDR DIMM
ITE8712
1 CNR(Communication and Networking Riser) Slot (**)
1 AGP slot 4X (1.5V only) device support
6 PCI slot supports 33MHz & PCI 2.2 compliant
2 IDE controllers on the Intel ICH4 PCI chipset
provides IDE HDD/CD-ROM (IDE1, IDE2) with PIO, Bus Master
(Ultra DMA33/ATA66/ATA100) operation modes.
IDE3 and IDE4 Compatible with RAID,Ultra ATA133/100.(**)
1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M
and 2.88M bytes.
1 Parallel port supports Normal/EPP/ECP mode
2 Serial ports (COMA & COMB)
Support USB 2.0/1.1
(6 x USB 2.0/1.1 by ICH4,2 port rear,4 ports by cable)
(4 x USB 2.0/1.1by NEC D720100AS1 by cable**)
1 IrDA connector for IR/CIR
1 Front Audio connector
- 5 -
4 processor
®
4 (Northwood, 0.13 m) processor
4 Processor with HT Technology
to be continued......
Introduction
Advertisement
Table of Contents
