Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Hällde Manuals
  4. Cutter
  5. RG-250
  6. User instructions

Hällde RG-250 User Instructions

Vegetable preparation machine
Hide thumbs Also See for RG-250:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
User instrUctions
vegetable preparation machine rg-250
made in sweden. exclusively distributed and serviced in australa by roband australia pty ltd.
all standard hällde products are designed to run at 220-240v per phase, 50hz.
all specifications are nominal only. all information contained in this instruction is subject to change without notice
due to constant research and development. ab hällde maskiner reserves the right to make changes to machines,
accessories and cutting tools.
Roband Australia Pty Ltd
all care has been taken to ensure correct information at time of printing. ab hällde maskiner
1 inman road,
accepts no responsibility for printing errors.
cromer, nsW 2099
australia
tel: +61 2 9971 1788
Fax: +61 2 9971 1336
www.roband.com.au
robandaustralia
0319
email: sales@roband.com.au

Advertisement

loading
Need help?

Need help?

Do you have a question about the RG-250 and is the answer not in the manual?

Questions and answers

Related Manuals for Hällde RG-250

Summary of Contents for Hällde RG-250

  • Page 1 User instrUctions vegetable preparation machine rg-250 made in sweden. exclusively distributed and serviced in australa by roband australia pty ltd. all standard hällde products are designed to run at 220-240v per phase, 50hz. all specifications are nominal only. all information contained in this instruction is subject to change without notice due to constant research and development.

  • Page 2: Installation

    The 3-phase version of the RG-250 may Fit the decoring device by turning it anti- connecting the machine back to the power only be installed by a qualified service clockwise by means of the wrench onto the mechanic.
  • Page 3 PARTS / ASSEMBLING ASSEMBLING CUTTING TOOL USING THE FEEDER FEED CYLINDER DECORING DEVICE LETTUCE * CUTTING TOOL PESTLE POTATOES ALWAYS USE! EJECTOR PLATE TOMATOES CUCUMBER MACHINE BASE WITH ERGO LOOP *Assebling / Dismantling Cutting Tools: See page 44-45. HALLDE • User Instructions...
  • Page 4 PARTS / ASSEMBLING ASSEMBLING CUTTING TOOL FEED CYLINDER DECORING DEVICE LETTUCE * CUTTING TOOL PESTLE POTATOES ALWAYS USE! EJECTOR PLATE TOMATOES CUCUMBER MACHINE BASE WITH ERGO LOOP HALLDE • User Instructions...
  • Page 5 • Dry them immediately after cleaning and without a sprint). store them in a well-ventilated place. Do not put them into drawers. RG-200, RG-250, RG-350 AND RG-400i: On these machines all cutting tools must TIPS: be locked with a locking device. These...
  • Page 6 FITTING THE CUTTING TOOLS WHEN USING SLICER, CRIMPING SLICER WHEN USING DICING JULIENNE OR GRATER/SHREDDER OR POTATO CHIP GRID CC - 32S, RG - 50S, CC - 34 , RG - 50 AND RG - 100 CC - 34, RG - 50 AND RG - 100 Cutting tool Cutting tool from RG-100 Ejector plate...
  • Page 7 Vegetable Preparation Machine RG-100 and RG-200 Vegetable Preparation Machine RG-250 HALLDE • User Instructions...
  • Page 8 Vegetable Preparation Machine RG-250 HALLDE • User Instructions...

  • Page 9: Declaration Of Conformity

    ADDRESS DECLARE UNDER OUR SOLE RESPONSIBILITY THAT THE FOLLOWING PRODUCTS: RG-50S, RG-50, VPU/FP-50, RG-100, VPU/FP-100, FP-150, RG-200, MODEL NAME VPU/FP-200, RG-250, VPU/FP-250, RG-7, RG-350, VPU/FP-350, RG-400, VPU/FP-400 RG-400i, VPU-400i, FP-400i. SERIAL NUMBER CONFORM TO THE FOLLOWING DIRECTIVES AND STANDARDS Standards:...