Password Check - Gigabyte GA-8IE800 User Manual

FBoot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is 40
tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
8Enabled
that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are
all 80tracks.
BIOS will not search for the type of floppy disk drive by track number. Note
8Disabled
that there will not be any warning message if the drive installed is 360 K.
(Default value)
C Password Check
The system can not boot and can not access to Setup page will be denied
8System
if the correct password is not entered at the prompt.
The system will boot, but access to Setup will be denied if the correct
8Setup
password is not entered at the prompt. (Default value)
CCPU Hyper-Threading*
Enables CPU Hyper Threading Feature. Please note that this feature is only
8Enabled
working for operating system with multi processors mode supported.
(Default value)
Disables CPU Hyper Threading.
8Disabled
FDRAM Data Integrity Mode
This feature allows you to set the DRAM data Integrity Mode
Set the DRAM data Integrity Mode is Non-ECC (Default)
8Non-ECC
Set the DRAM data Integrity Mode is ECC.
8ECC
FInit Display First
This feature allows you to select the first initation of the monitor display from which card, when
you install an AGP VGA card and a PCI VGA card on board.
Set Init Display First to PCI Slot.
8PCI
Set Init Display First to AGP. (Default value)
8AGP
GA-8IE800 Motherboard - 32 -