Subscribe to Our Youtube Channel
Summary of Contents for Barn Owl Universal Mount
- Page 1 BARN OWL Universal Mount INSTRUCTION MANUAL VERSION 1.0 | AUGUST 2024 WWW.BARNOWL.TECH...
-
Page 2: Mounting System Components
TABLE OF CONTENTS MOUNTING SYSTEM COMPONENTS Components Ways to Use the Universal Mounting System Tree Stud Mount Instructions Strap Mount Instructions 1 x Tree Stud 1 x Strap 2 x Hose Clamps 1 x Base Plate 1 x Ball Mount Screw In Mount Instructions Hose Clamp Mount Instructions 2 x Washers... - Page 3 Use Cases • Perfect for mounting to trees. Required Parts and Tools 1 x Tree Stud 1 x Ball Mount 2 x Washers Tree Stud Mount Strap Mount Screw In Mount Hose Clamp Mount Barn Owl Camera or Solar Panel...
- Page 4 3. Turn the handle on the side of the ball 4. Locate the mounting point on the 1. Screw the tree stud into the trunk of a 2. Firmly screw one end of the ball mount mount counter-clockwise to loosen it camera or solar panel you want to mount.
-
Page 5: Strap Mount
5. Adjust the camera or solar panel 1 x Ball Mount so that it is pointing in the desired orientation and turn the handle on the ball 2 x Washers mount clockwise until tight. Barn Owl Camera or Solar Panel... - Page 6 1. Feed the end of the strap through two 2. Wrap the strap around the trunk of the 3. Pull the strap tight, making sure that 4. Firmly screw one end of the ball mount of the long slits on either side of the base tree and feed the end of it through the the base plate remains flush against the into a hole of the base plate.
- Page 7 5. Turn the handle on the side of the 6. Locate the mounting point on the ball mount counter-clockwise to loosen camera or solar panel. Screw it into the 7. Adjust the camera or solar panel so that it is it enough so that you can adjust the available end of the ball mount.
- Page 8 4 x Screws 1. Mount the base plate against the 2. Drive a screw into the surface through Barn Owl Camera or Solar Panel surface so that the beveled edges of the one of the corner slots of the base plate.
- Page 9 5. Turn the handle on the side of the 6. Locate the mounting point on the 3. Repeat with three additional screws, 4. Firmly screw one end of the ball mount ball mount counter-clockwise to loosen camera or solar panel you want to mount. one in each corner.
- Page 10 Base Plate Ball Mount 7. Adjust the camera or solar panel so that it is 2 x Washers pointing in the desired orientation and turn the handle on the ball mount clockwise until tight. Barn Owl Camera or Solar Panel...
- Page 11 3. Hold the base plate securely against 4. Firmly screw one end of the ball mount 1. Unscrew the hose clamps by turning 2. Feed the ends of the hose clamps the post and use your power drill or into a central hole of the base plate. the screw mechanism counterclockwise.
- Page 12 5. Turn the handle on the side of the 6. Locate the mounting point on the 7. Adjust the camera or solar panel so that ball mount counter-clockwise to loosen camera or solar panel you want to mount. it is pointing in the desired orientation it enough so that you can adjust the Screw it into the available end of the ball and turn the handle on the ball mount...
-
Page 13: Need Help
NEED HELP? Contact us anytime: Phone: 720-594-3649 Email: support@barnowl.tech Online: www.barnowl.tech Hours: 9am-6pm EST BARN OWL HELP CENTER Monday-Friday...
Need help?
Do you have a question about the Universal Mount and is the answer not in the manual?
Questions and answers