netvox R603 User Manual

Wireless customized voice announcer

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

R603

Wireless Customized Voice Announcer

R603 User Manual

This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence

and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The specifications are subject

to change without prior notice.

Table of Contents

Need help?

Do you have a question about the R603 and is the answer not in the manual?

Questions and answers

Summary of Contents for netvox R603

Page 1 This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The specifications are subject...
Page 2: Table Of Contents
Table of Contents 1. Introduction ..................1 2. Appearance ..................2 2. Features ..................... 3 3. Setup Instructions ................4 4. Data Report ..................5 4.1 Example of Reportdatacmd ............6 4.2 Example of Report Configuration ..........8 4.3 Example of Netvoxlorawanrejoin ..........12 4.4 Example for Mintime/Maxtime Logic ........
Page 3: Introduction
RGB LED light, R603 makes every application as special as customized. In addition to its highly customized features, its backup battery supports non-stop operation when the main power source fails. R603 not only helps you build a more comprehensive alarm system but also gives you more options for every application.
Page 4: Appearance
2. Appearance ▲ Front ▲ Side ▲ Back...
Page 5: Function Key
Type-C Function key Indicator 2. Features ⚫ DC12V power supply ⚫ 3* AAA 1.2V Ni-MH batteries as backup power ⚫ Simple installation and setting ⚫ IP30 ⚫ 10 default alarm sounds ⚫ Customizable setting of volume and light ⚫ Compatible with LoRaWANTM Class C ⚫...
Page 6: Setup Instructions
Plug in the power adapter or insert three 1.2V nickel metal hydride batteries. Turn on Note: a. The device is powered by DC12V even when the batteries are in. b. The white indicator flashes once when R603 is successfully powered on. Network Joining Turn on the device to search the network.
Page 7: Data Report
– 3.1V). The network indicator flashes once every 5 seconds until the batteries are fully charged. 5. If R603 is powered by dying batteries without the support of DC power, distorted sounds made by batteries could occur. Please reconnect the DC power and charge the batteries as soon as possible.
Page 8: Example Of Reportdatacmd
(5 Bytes, fixed 0x00) unit:0.1V) 0x01_Warning) Example of Uplink1: 01DE012601010000000000 Byte (01): Version Byte (DE): DeviceType 0xDE－R603 Byte (01): ReportType Byte (26): Battery — 3.8V 26 (HEX) = 38 (DEC), 38*0.1V = 3.8V Byte (01): WarningStatus — Warning –11 Byte (000000000000): Reserved...
Page 9 Byte (01): Version Byte (DE): DeviceType 0xDE－R603 Byte (01): ReportType Byte (00): Battery — 0V (R603 is powered by DC with no backup batteries in the case.) Byte (00): WarningStatus — NoWarning Byte (00): ContactSwitchStatus — Off –11 Byte (0000000000): Reserved...
Page 10: Example Of Report Configuration
Reserved Note: If the number 0x01_LedBlinkMode1 StartSirenReq 0x03 (0-30, (2 Bytes, (4 Bytes, of music files R603 0xDE in Parallel to Warning 1 Byte) unit: 1s) fixed 0x00) exceeds the default 0x02_ LedBlinkMode2 ten, such as thirty, in Parallel to Warning) then the downlink “no”...
Page 11 GetPeriodSire 0x05 Reserved (9 Bytes, fixed 0x00) nReq SirenNo (1 Byte) StrobeMode (1 Byte) (0x00_0x0A, (0x00_NoLedIndication Period Reserved Others_Reserved) SirenLevel Duration GetPeriodSire Time (2 Bytes, 0x01_LedBlinkMode1 Note: If the number 0x85 (0-30, (2 Bytes, nRsp (2 Bytes, fixed in Parallel to Warning of music files 1 Byte) unit: 1s)
Page 12 (2) StartSirenReq Execute the command and report WarningStatus = 0x01. WarningStatus = 0x00 is sent after the alarm stops. Set Emergency alarm SirenNo = 0x01 (Emergency); SirenLevel = 0x0F (15); StrobeMode = 0x01 (Flowing); Duration = 0x000A (10s) Downlink: 03DE010F01000A00000000 Set Doorbell SirenNo = 0x02 (Doorbell);...
Page 13 (4) SetLEDColorReq (Last configuration would be kept after the device is factory reset.) Set LED color as 0xFF 0x00 0x00 (Red) Downlink: 07DEFF0000000000000000 Response: 87DE000000000000000000 (configuration success) 87DE010000000000000000 (configuration fail) GetLEDColorReq Downlink: 08DE000000000000000000 Response: 88DEFF0000000000000000 (configuration success)
Page 14: Example Of Netvoxlorawanrejoin
4.3 Example of NetvoxLoRaWANRejoin (NetvoxLoRaWANRejoin command is to check if the device is still in the network. If the device is disconnected, it will automatically rejoin back to the network.) Fport: 0x20 CmdID CmdDescriptor Payload (5 Bytes) (1 Byte) RejoinCheckPeriod (4 Bytes, unit: 1s SetNetvoxLoRaWANRejoinReq 0x01...
Page 15: Alarm Sound Customization
5. Alarm Sound Customization (1) Connect the computer and device with a Type-C cable. (2) Wait 1 to 2 minutes until the virtual USB drive appears. (3) Right click the USB Drive and select format. (4) Click OK to start formatting.
Page 16 (5) Format complete. (6) Turn off and on the device. The flash drive should be empty as the picture shown below.
Page 17 (7) Create a new folder in USB Drive and rename it as 01. (8) Put all files of audio alerts in the 01 folder. (9) Name all audio alerts as 00x.mp3. Default: 001.mp3: Emergency 006.mp3: No smoking 002.mp3: Doorbell 007.mp3: Poor air quality 003.mp3: Burglar 008.mp3: The temperature is too high 004.mp3: Water leaking...
Page 18: Installation Instructions
6. Installation Instructions (1) Turn R603 over and hold the clip to remove the cover. (2) Check the polarity and insert 3* AAA 1.2V Ni-MH batteries. (3) Close the battery cover.
Page 19 (4) Plug in the DC12V cable. (5) Open the lid of R603. Hold R603 with your left hand and turn the lid counterclockwise with your right hand. (6) Short press the function key to test R603. Function key...
Page 20 (7) Close the lid back to R603 by turning clockwise. Note: Please make sure the clips match the notches before turning the lid. Notch Clip...
Page 21: Important Maintenance Instructions
7. Important Maintenance Instructions Kindly pay attention to the following to achieve the best maintenance of the product: • Keep the device dry. Rain, moisture, or any liquid might contain minerals and thus corrode electronic circuits. If the device gets wet, please dry it completely.