Related Manuals for Sony Aiwa JAX-N1
Summary of Contents for Sony Aiwa JAX-N1
- Page 1 -246-141-71 030403AMI-DS-SO Mini Hi-Fi Component System JAX-N1 © 2003 Sony Corporation...
-
Page 2: Precautions
PRECAUTIONS WARNING To prevent fire or shock hazard, do not expose On operating voltage On heat buildup the unit to rain or moisture. Before operating the system, check that the operating voltage •Although the unit heats up during operation, this is not To avoid electrical shock, do not open the cabinet. -
Page 3: Table Of Contents
TABLE OF CONTENTS Notes on discs IMPORTANT: Check your AC voltage!! PRECAUTIONS ........2 •Discs recorded on CD-R/RW drives may not be played back The unit's AC voltage can be switched between 110 - 120V PREPARATIONS ........4 because of scratches, dirt., recording condition or the drive's and 220 - 240V. -
Page 4: Preparations
PREPARATIONS 2 Connect the supplied antennas. Connection Remote Connect the FM antenna to the FM 75 Ω terminal and Plug in the AC power cord to the AC power outlet after all other Detach the battery compartment lid at the rear of the remote the AM antenna to the AM LOOP terminals. -
Page 5: Parts And Controls
PARTS AND CONTROLS FM 75 Ω terminals (4) 1 AM LOOP, Main unit: rear Plug in the supplied AM and FM antennas here. Refer to the pages indicated in parentheses for details. 2 VIDEO/AUX jacks Accepts analog sound signals from external equipment. Connect using an optional connecting cable with RCA phono plugs (red plug to R jack, white plug to L jack). - Page 6 5 MULTI JOG (8-12, 14-17, 19, 20) Main unit: front CD (10) When used in combination with ENTER and MULTI JOG, Selects CD function. Refer to the pages indicated in parentheses for details. CD: selects a track and Repeat/Shuffle/Programed @ Remote sensor playback.
- Page 7 Remote control 8 FUNCTION TAPE A/B (14) Switches the active function among CD, TAPE, TUNER Refer to the pages indicated in parentheses for details. TUNER MODE (13) and VIDEO (AUX or TV). Switches between stereo or monaural FM reception. 9 DISC SKIP (10) KARAOKE (18) Select a disc.
-
Page 8: Adjustments Before Operations
ADJUSTMENTS BEFORE OPERATIONS ECO mode POWER POWER STANDBY / ON Saves the power consumption while the unit is turned off (in standby mode). SPECTRUM MODE 1 Press MODE repeatedly until "ECO MODE?" VOLUME ENTER appears in the display and then press ENTER. MULTI JOG 2 Turn MULTI JOG to select "ECO ON"... -
Page 9: Setting The Clock
To display the time Dimmer Setting the clock Press DISPLAY on the remote. The time will be displayed for Adjusts the brightness of the display. Use the remote. 6 seconds. 1 Press MODE repeatedly until "DIMMER ?" 1 Press CLOCK/TIMER/SET. Tip: appears in the display when the unit is turned on Go to step 3 when the time appears and the 'hour' flashes. -
Page 10: Cd Operations
CD OPERATIONS To replace disc(s) during playback without DISC DIRECT 1–0/10, interruption OPEN/CLOSE PLAY 1-3 While one disc is being played back, press DISC CHANGE so DISC CHANGE that the compartment opens, replace disc(s) with other one(s), DISC SKIP MODE and press DISC CHANGE to close the compartment. -
Page 11: Shuffle Playback
•You cannot program more than 30 tracks. "FULL" is Shuffle playback Programed playback displayed. Plays the tracks on one desired disc or all discs in random Plays back up to 30 selected tracks in programed order. order. To clear a track 1 Press MODE repeatedly until "PLAY MODE?"... -
Page 12: Tuner Operations
TUNER OPERATIONS Tuning in to preset stations 1–0/10, On the unit BAND POWER 1 Press TUNER/BAND to select a band. TUNER TUNER/ MODE BAND 2 Press cPRESET repeatedly or turn MULTI JOG. ENTER With each press, the station with the succeeding preset number is tuned in. - Page 13 Adjustments Antennas Keep antennas away from metallic objects, electrical equipment and cords. FM antenna: Extend fully and position for the best reception. If receiving condition is poor, connect optional outdoor antenna FM 75 Ω terminal. Use an adapter as required. AM antenna: Rotate to find best reception.
-
Page 14: Tape Operations
TAPE OPERATIONS Notes on cassettes DISC DIRECT 1–0/10, PLAY 1-3 •Use of a tape longer than 90 minutes is not recommended EDIT TAPE A/B since they are extremely thin and easily damaged. If you DISC SKIP should use it, do not change the tape operations such as TAPE A/B play and stop frequently. - Page 15 To stop recording 5 Press the numbered buttons on the remote to Whole tape dubbing Press s. enter the length of the recordable tape. 1 Press TAPE A/B to select the TAPE function. 10 to 99 minutes can be specified. To pause recording (only for TUNER or VIDEO/AUX - For a 60-minute tape press 6 and 0/10.
- Page 16 9 Press wREC/REC MUTING to start recording on Programed Edit Recording To prevent accidental erasure side A. Remove the plastic tab of the cassette tape with a screwdriver As you program the CD tracks to record, Programed Edit The tape is rewound to the beginning of side A and or other pointed tool.
-
Page 17: Sound Adjustments
SOUND ADJUSTMENTS i-Bass Produces rich and clear low frequency sound besides BASS effect. MODE TREBLE 1 Press i-Bass to select "I-BASS ON". The red indicator on i-Bass button lights up. ENTER 2 Turn BASS to adjust from 1 to MAX(5). MULTI JOG BASS To select the frequency range for i-Bass effect... -
Page 18: Karaoke
KARAOKE •Sound source is played in monaural in Multiplex. FUNCTION •Multiplex is canceled when the function is changed or the unit is turned off. KARAOKE VOLUME To cancel the karaoke mode Press SHIFT+KARAOKE on the remote repeatedly until "MPX- OFF" appears. MIC MIXING TAPE A/B, TUNER/BAND,... -
Page 19: Timer Operations
TIMER OPERATIONS 5 Press r or t to set the timer-on minute POWER and then press ENTER. "OFF TIME" appears for a moment. POWER 6 Repeat step 4 and 5 to set the timer-off hour and VOLUME ENTER minute. 7 Press r or t to select the source (CD, MULTI JOG TAPE and TUNER) and then press ENTER. -
Page 20: Timer Recording
•To stop timer setting in step 3 to 4, press CLEAR on the Timer recording Notes remote. Timer standby mode is also canceled. •The Timer playback performs every day at the specified time Turns on the unit and makes recording once at a specified time. •The Timer recording will not begin unless the unit is turned unless you cancel it. -
Page 21: Reference
REFERENCE The clock setting/radio presetting/timer is canceled. Care and maintenance Troubleshooting •The AC power cord is disconnected or a power failure occurs Occasional care and maintenance of the unit and the software If your unit fails to perform properly, check the following guide longer than half a day. - Page 22 Poor tape sound. The CD will not play. •Use TYPE I (normal) tapes. •The CD is not lying flat in the disc compartment. Tuner •The CD is dirty. •The CD is inserted label side down. Noise is heard or poor reception. •Moisture condensation has built up.
-
Page 23: Specifications
GENERAL Specifications Power requirements 110 - 120V / 220 - 240V AC MAIN UNIT CX-JN1 (Switchable), 50 Hz/60 Hz TUNER Power consumption 74 W Power consumption With ECO mode on: 0.25 W FM tuning range 87.5 MHz to 108 MHz in standby mode With ECO mode off: 15 W FM usable sensitivity (IHF) - Page 24 Sony Corporation http://www.aiwa.com/ Printed in China...
Need help?
Do you have a question about the Aiwa JAX-N1 and is the answer not in the manual?
Questions and answers