Advertisement
Quick Links
MT999BF/***
BATCH FEED ADAPTER KIT
INSTALLATION SHEET
WARRANTY
FOR WARRANTY INFO PLEASE VISIT WWW.MOUNTAINPLUMBING.COM/WARRANTY-CLAIMS
FINISH CARE & MAINTENANCE
NEVER USE ANY HARSH ALKALI, ACID BASED DETERGENTS OR CLEANERS SUCH AS SOFT SCRUB®, SCRUBBING BUBBLES® OR COMET® TO CLEAN. DO NOT USE
BRILLO® OR SCOTCH BRITE® PADS. THESE WILL ALL HARM THE FINISH. TO CLEAN, USE ONLY A DAMP SOFT CLOTH AND WIPE GENTLY. STANDARD WINDEX® CAN
ALSO BE USED SPARINGLY. IT IS NOT NECESSARY TO WIPE HARD TO REMOVE SPOTS. TO MAINTAIN THE FINISH, WIPE WITH A SOFT DRY CLOTH AFTER USE. AN
OCCASIONAL COAT OF PURE CARNAUBA WAX WITHOUT CLEANERS WILL HELP PROTECT THE FINISH.
9/27/2024
•
•
•
•
•
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
www.mountainplumbing.com
972-456-3273
Details
FITS STAINLESS STEEL CERAMIC
SINKS UP TO 13/16" THICK
NO WALL SWITCH REQUIRED.
ADAPTS USING STANDARD
PLUG, NO WIRE NUTS NEEDED
40" POWER CORD
THIS KIT WILL INCREASE
DISPOSER HEIGHT BY 3/4"
WHICH COULD AFFECT
EXISTING PLUMBING
CONNECTIONS.
1 YEAR WARRANTY (VOID IF
USED WITH NON-MOUNTAIN
DISPOSER)
fax 972-456-2719
MT999BF inst sht
Page 1
Advertisement
Summary of Contents for McAlpine Mountain Plumbing Products MT999BF Series
- Page 1 MT999BF/*** BATCH FEED ADAPTER KIT INSTALLATION SHEET Details • FITS STAINLESS STEEL CERAMIC SINKS UP TO 13/16" THICK • NO WALL SWITCH REQUIRED. ADAPTS USING STANDARD PLUG, NO WIRE NUTS NEEDED • 40" POWER CORD • THIS KIT WILL INCREASE DISPOSER HEIGHT BY 3/4"...
-
Page 2: Kit Includes
MT999BF/*** BATCH FEED ADAPTER KIT INSTALLATION SHEET Kit Includes: Extended Flange Interlock Strainer 2 1/2" Bolt (x3) Magnetic Switch Electrical Box WARRANTY FOR WARRANTY INFO PLEASE VISIT WWW.MOUNTAINPLUMBING.COM/WARRANTY-CLAIMS FINISH CARE & MAINTENANCE NEVER USE ANY HARSH ALKALI, ACID BASED DETERGENTS OR CLEANERS SUCH AS SOFT SCRUB®, SCRUBBING BUBBLES® OR COMET® TO CLEAN. DO NOT USE BRILLO®... - Page 3 MT999BF/*** BATCH FEED ADAPTER KIT INSTALLATION SHEET UNPLUG GARBAGE DISPOSAL FROM ELECTRICAL OUTLET AND DISCONNECT DRAIN TRAP AND DISH WASHER IF THERE IS ONE UNMOUNT GARBAGE DISPOSAL NOW THAT IT IS FREE TO MOVE BY ROTATING BOTTOM MOUNT CLOCK WISE WARRANTY FOR WARRANTY INFO PLEASE VISIT WWW.MOUNTAINPLUMBING.COM/WARRANTY-CLAIMS FINISH CARE &...
- Page 4 MT999BF/*** BATCH FEED ADAPTER KIT INSTALLATION SHEET UNSCREW 3 SHORT BOLTS TO ALLOW REMOVAL OF METAL RING WITH FLAT HEAD SCREW DRIVER TO METAL RING THEN REMOVE THE FLANGE. EXTENDED FLANGE INSERT EXTENDED FLANGE, ATTACH METAL RING, AND TIGHTEN LONG SCREWS INCLUDED IN KIT IF SINK IS LESS THAN1/2"...
- Page 5 MT999BF/*** BATCH FEED ADAPTER KIT INSTALLATION SHEET REATTACH DISPOSER TO UPPER MOUNT BY PUSHING UP AND ROTATING THE LOWER MOUNT COUNTER CLOCK WISE TO GRIP AND ATTACH DRAIN TRAP ALSO TO THEN ENSURE EVERYTHING IS SECURE ATTACH THE LEFT SIDE OF THE MAGNETIC SWITCH OVER A BOLT AND ENSURE IT HOOKS UNDER THE MOUNTING RING.
- Page 6 MT999BF/*** BATCH FEED ADAPTER KIT INSTALLATION SHEET ONCE THE LEFT SIDE OF THE MAGNETIC SWITCH IS MOUNTED ON A BOLT, COMPRESS SPRING TO ALLOW THE RIGHT SIDE TO COVER OTHER BOLT AND ALSO ENSURE THE HOOK IS UNDER MOUNTING RING COMPRESS SPRING MAGNET SWITCH PUSH IN TO LOCK IN PLACE...
- Page 7 MT999BF/*** BATCH FEED ADAPTER KIT INSTALLATION SHEET INSERT INTERLOCK STRAINER INTO THE SINK FLANGE. ONCE FULLY INSERTED, ROTATE HANDLE CLOCKWISE TO RAISE BASKET AND ACTIVATE DISPOSER & KEEP TURNING TO DEACTIVATE . TURN COUNTER CLOCKWISE TO LOWER BASKET & PLUG DRAIN. WARRANTY FOR WARRANTY INFO PLEASE VISIT WWW.MOUNTAINPLUMBING.COM/WARRANTY-CLAIMS FINISH CARE &...
Need help?
Do you have a question about the Mountain Plumbing Products MT999BF Series and is the answer not in the manual?
Questions and answers