Arozzi ARENA MOTO Operation Manual

ARENA MOTO
Operations Manual
Wake up controller
• Short-press Up or Down and the display will show current height and react to further input
Up/Down operation
• Press the Up button until you reach your desired height. The operation stops when reaching the
highest possible point.
• Press the Down button until you reach your desired height. The operation stops when reaching the
lowest possible point.
Position memory
• You can save up to four positions corresponding to the save buttons (1, 2, 3, 4). Save the current
position by pressing the M key and then your prefferred save button.
• You can see previously saved positions by short-pressing any save button. The display will then show
the saved height.
• Double click or long press any of the save buttons (1, 2, 3, 4) and the desk will move to the
corresponding position.
Setting a minimum height
• To set the current height as minimum height for the desk, hold down both Down + M buttons until the
display shows "-do" indicating that the minimum height has been stored. Storing a minimum height
ensures that the desk never goes below this position.
• To delete the saved minimum height, let the desk run downwards until it stops. Press down again and
the display shows "-Lo". Then hold down Down + M buttons until the display shows "-do" indicating
that the stored minimum height has been deleted.
© Arozzi Europe AB. 2024
073
Designed in Sweden
®