Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for DeKo DKID13Z3
- Page 1 V2112 INSTRUCTION MANUAL IMPACT DRILL MODEL NO.: DKID13Z3 See page 1 ⚠ IMPORTANT: Read this instruction manual before operating this product. Keep the instruction manual for future reference. DEKO TOOLS CO., LIMITED www.dekotools.com Made in China...
-
Page 2: General Power Tool Safety Warnings
General Power Tool Safety Warnings ⚠ WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... -
Page 3: Special Safety Instructions
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations. 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. -
Page 4: Symbol Explanation
Symbol Explanation In this manual and/or on the machine the following symbols are used: Read instruction manual before use. Conforms to relevant legislation and safety standards. Do not dispose of power tools and batteries/rechargeable batteries into household waste! Dispose the products according to the regulation and requirement of local council. -
Page 5: Technical Data
Technical data Model Number DKID13Z3 Rated Voltage/Frequency 230V~50Hz Input Power 710W No-Load Speed 0-3000rpm Impact rate 0-44800bpm Chuck Size 13mm Wood: 25mm Drilling Capacity Steel: 10mm Concrete: 13mm Protection Class 回/II Intended Use The machine is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. - Page 6 Clockwise/Counter-clockwise switch CAUTION: Change switch position only when the drill is at a standstill! Switch the direction of the hammer drill using the clockwise/counter-clockwise switch (9): Clockwise (forwards and drill, switch to “R”. Counter-clockwise (reverse), switch to “L”. On/off switch a) First fit a suitable drill bit into the tool.
-
Page 7: Cleaning And Maintenance
Drill / hammer drill selector switch ⚠ WARNING: Change switch position only when the drill is at a standstill! Drill Drill / hammer drill selector switch (4) in the drill position. Use for: Wood, metal, plastic Hammer drill Drill / hammer drill selector switch (4) in the hammer drill position. Use for: Concrete, rock, masonry Tips for working with your hammer drill Drilling concrete and masonry... -
Page 8: Carbon Brushes
a) Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure. b) We recommend that you clean the device immediately each time you have finished using it. c) Clean the equipment regularly with a moist cloth and some soft soap.
Need help?
Do you have a question about the DKID13Z3 and is the answer not in the manual?
Questions and answers