CD4IOT -051 User Manual page 4

USER GUIDE. CD4IOT-051
CONFIGURATION
The user can program it using SMS Commands.
There is a default password that the user can change. We will refer to the
password when PWD is indicated. This password will be provided with the
confirmation of each order.
All settings are via SMS commands, edit the SMS commands on your mobile
phone, then send them to the INTERCOM CD4IOT-051
Remember that commands must always be CAPITAL LETTERS. Do not add
spaces or any other characters.
f the command is incorrect, the INTERCOM will return: SMS format error.
Check Caps Lock in the command. If the password is incorrect, it will not return any SMS.
The SMS commands that you will use on the INTERCOM CD4IOT-051 are the following
Change access password.
PWD+P+new password
If the change is made successfully the confirmation message will be:
"New password. This is the New Password, please remember it"
Example. If the current password is 1111 and we want to change it to 8888, we must send an SMS with the
message 1111P8888
Free number Access
We want any number to be able to call/be called to/from INTERCOM CD4IOT-051.
PWC+CC
If the change is made successfully the confirmation message will be:
"Allows all numbers call in"
List of numbers authorized to communicate
We will establish a list of a maximum of 10 numbers with which the INTERCOM CD4IOT-051 will
communicate.
The first three will be part of the calling process from the SOS button on the INTERCOM CD4IOT-051.
All numbers on the list will be able to call the INTERCOM number.
The rest of the numbers will be automatically rejected
PWD+DD
Create list of authorized numbers
We will create a list with a maximum of 10 phone numbers. All these numbers will be able to call and receive
calls from the INTERCOM CD4IOT-051.
CD4IOT SL -
NIF : B-67331900. Barcelona - España
www.cd4iot.com – info@cd4iot.com
Versión actualizada 20/08/2024 Guía de Uso CD4IOT-051 - Página 4 de 6