BRICK HOUSE Eon Odyssey User Manual

Hide thumbs

Table of Contents

Quick Links

Download this manual

Eon Odyssey

User's Guide

Table of Contents

Need help?

Do you have a question about the Eon Odyssey and is the answer not in the manual?

Questions and answers

Summary of Contents for BRICK HOUSE Eon Odyssey

Page 1 Eon Odyssey User’s Guide...
Page 2 What’s Inside Eon Odyssey Wall Charger...
Page 3: Getting Started
Charge Your Device The charging port for the EON Odyssey is located beneath the small rubber cap next to the battery indicator. Connect to a power source using the included cable for at least 5 hours. The battery indicator will blink for several seconds to indicate it is charging, then turn off.
Page 4 For the best results, ensure your Eon Odyssey has a clear view of the sky avoiding placement within enclosed spaces. Unobstructed Sky View: The device operates most accurately when it can communicate directly with GPS satellites.
Page 5: Product Interface
Product Interface Note: This device comes with a SIM card pre-installed by BrickHouse Security. The tracker will NOT function if the SIM card is removed or replaced with a SIM from a different provider. Your unit comes pre-programmed and should not be accessed or altered through these interfaces. Programming can only be conducted via over-the-air commands.
Page 6 Tamper Sensor The Eon Odyssey is equipped with a light sensor that detects when the device is removed, triggering a tamper alert instantly. When the light sensor detects light exposure, you will receive a notification of device removal. This additional security feature ensures that you are promptly notified of any unauthorized attempts to tamper with or remove the tracking device, enabling you to take swift action.
Page 7 Tracking Your Device Eon Odyssey will send continuous location updates while your vehicle is moving. The frequency of these updates will depend on the service plan for your device and can range from every 5 seconds to every minute. In the following pages, you will learn how to set up and customize the web interface of our Locate GPS tracking platform, as well as the mobile app, which is available in the iOS App Store and the Google Play Store.
Page 8 If you pressed Forgot your password? by accident, delete the received email with a password reset link and use your previous login and password. If you follow the link, you must enter a new password. You can reset the password no more than once a minute.
Page 9: User Settings
User Settings To choose user parameters, click on the username in the right corner of the top panel and press the ‘User settings’ button in the dropdown menu. Next, follow the steps: • Indicate your time zone. • Select the type of daylight savings time used in your region. Please select the settings properly, as they will be used when generating reports, messages, and elsewhere throughout the system.
Page 10 Editing Your Unit Make sure the device is displayed on the monitoring tab before editing a unit. Click the wrench icon next to the unit you want to edit in the 'Units' tab of the work area. When shown on the map, a unit is represented by an icon with a caption displaying its name.
Page 11 Alternatives to Icons Unit icons can be replaced with simple motion indicators. This option is called Replace unit icons with motion state signs and is set in the user settings. The following symbols are: ● Green arrow: the unit is moving, and the direction of the arrow indicates the direction of movement ●...
Page 12: Monitoring Tab
Monitoring Tab The Monitoring tab gives access to the main tracking features. Here you can watch the movement of units on the map, send commands and messages to them, monitor parameter changes online, etc. To open the Monitoring tab, click on its heading in the top panel. The tab has a list of units that you can monitor on the map.
Page 13 To locate a unit on the map, click on its name in the list. The map centers and zooms in on the selected unit. The map displays only those units that are selected in the list. You can select or deselect all units at once using the checkbox in the top left corner of the list.
Page 14: Tracks Tab
Tracks Tab A track is a line drawn on the map to show how a unit moved during the indicated period. A track is mapped using the points from where messages were reported. Each point stores the date and time when the message was received and coordinates at the point, as well as other parameters (speed, sensors, etc.).
Page 15 Mapping a Track 1. Select a unit in the dropdown list. Its contents depend on the list in the Monitoring tab and access to the units. 2. Adjust the desired parameters for the track (color, thickness, etc.). 3. Define the time interval within which you want to get the data. 4.
Page 16 Below, we see the result of choosing a single track (one solid color), but you can also select to show a single unit with varying colors for different sensor values and speeds. This will display the trip for the requested time period. You can now see the trip and play it back.
Page 17 Also, you can click on the circled icon below to see the trip as a geofence in the result line. If you hover the mouse over the icon on the map on the tracking tab, the tooltip will provide you with information.
Page 18: Reports Tab
Reports Tab To switch to the Reports tab, click the Reports header in the top panel and select the same name item in the main menu customizer. Reports on the activity of a unit are presented in the form of tables and graphs. They can be viewed in a browser window, as well as exported to files of various formats.
Page 19 Geofences and Notifications Creating a New Geofence By setting up a geofence and creating notifications, the platform can alert you when a GPS device you are monitoring enters or exits the defined area. You can be notified via text or email if it crosses into or out of the zone. Geofences can report units’...
Page 20 3. Click on New in the menu and give your geofence a clear name and description. It will be helpful when you receive alerts, as you will know which geofence is being triggered and can find the vehicle quickly. 4. After clicking the New button, a help window appears to provide you with instructions for drawing geofences. Choose a geofence type on the left: line, polygon, or circle.
Page 21 ● Double-click on any place on the map to put the first point. Add more points using the same method. Put the points as close or as far from each other as you want. ● Double-click on a segment between them to insert a point between two other points. ●...
Page 22 Line: Polygon:...
Page 23 When finished, press Save. In case of a mistake, press Clear and try again. To close the create mode without saving results, press Cancel. It is IMPORTANT that you create a notification for the newly created geofence for you to receive alerts. Creating a new Geofence Notification In the BrickHouse Locate GPS platform, you can receive notifications for any unit activity or change in the device's state.
Page 24 3. Choose Geofence and click Next. 4. Select when the notification should be triggered: ● When the unit enters the geofence (Inside geofence); ● When the unit leaves the geofence (Outside geofence). Select the resource whose geofences should be displayed in the list (select All available to view the geofences of all available resources).
Page 25 Using the icon , move the items from the left list to the right one. 5. Select Notification Actions Notify by email - When this action is selected, you can add email addresses to which the notification should be sent. To do this, check the box to the right of the field and specify an address.
Page 26 Notify by SMS - This action is used to set up SMS notifications. Type one or more telephone numbers in the international format, for example, +375293293294. When all fields for entering phone numbers are filled in, additional slots appear automatically. 6.
Page 27 7. At the last stage of creating a notification, specify the parameters for its triggering and click OK. The created notification appears in the list in the left part of the window.
Page 28 Getting to Know the BrickHouse Locate GPS Mobile App The BrickHouse Locate GPS mobile app is available on the Google Play and iOS App Store and can provide you with the same advanced tracking functionality as the web-based GPS platform. The app can be used on any smartphone or device that runs on Android or iOS.
Page 29: Login Screen
Login Screen Enter the same username and password you use on the web platform to log in to the mobile app.
Page 30: Unit Selection
Unit Selection Once logged in, you will see the list of units active on the account under the Monitoring tab. Adding items to the list 1. Select the Units or Groups tab. 2. Tap the icon located to the right of the search and tap Select items. 3.
Page 31: Map View
The General information section consists of tabs with unit properties. To select the tabs you want displayed in the section, click Configure tab view at the end of the list and enable or disable the required tabs using the switch. The indicated settings are applied to all the units at the same time.
Page 32 Tilt Gestures You can tilt the map by placing two fingers on it and moving them up (increasing tilt angle) or down (decreasing tilt angle). Map Rotation To rotate the map, place two fingers and apply a rotation motion. After the map has been rotated, a compass icon appears in the top right corner.
Page 33 The top row shows summary info. ● trip duration ( ● track length in trips ( ● parking duration ( Clicking on the time of the day will move the map to show the position where the unit was. The top panel displays the menu in the upper right corner which opens when you click on the menu button.
Page 34 Report Execution To execute a report, follow the steps described below. 1. Select a report template. ● Geofence ● Location History ● Trips and Parkings 2. Select a unit/unit group (depending on the selected template, the list shows all the available objects). 3.
Page 35 Thank you for choosing BrickHouse Security for your GPS tracking needs. For further support with the Locate GPS platform or anything else, please reach out to us by email, phone, or live chat at BrickHouseSecurity.com. Email: support@brickhousesecurity.com Phone: 800-654-7966 You can also find lots of learning materials including instructional videos on how to use specific features of the Locate GPS platform at: help.brickhousesecurity.com...