Advertisement
Advertisement
Table of Contents
Related Manuals for Hidrotek A05
Summary of Contents for Hidrotek A05
-
Page 2: Installation Instruction
Precautions for Use Product and Accessories Functional Schematic Diagram Installation Instruction Cartridge Replacement and Reset Trouble Shooting Technical Specification and Water Flow Diagram... - Page 3 Attention 1.Flush and replace cartridges regularly. 2.Do not disassemble parts randomly, it may cause leakage or damage. 3.Do not use power supply with disproportional rated voltage. 4.Please pull the power plug off and close the feed water valve if the machine is not used a long period of time. 5.Do not store or expose in an environment below 0℃...
- Page 4 Main Body Three Filter Cartridges 1. PCB filter (PP & CTO) 2. RO membrane 3.Post activated carbon filter(T-33) One Accessory Box Faucet ,Three pipes, Instruction book, Adapter, 3-way ball valve, accessory bag Images of accessories for reference: Faucet 3-way ball valve 1/4”PE pipe（1.5m）...
- Page 6 TUBE CUTTER NOTICE: Install diverter valve as per diagram below: 1.Close the feed water valve. 2.Wrap thread of diverter valve with teflon tape. 3.Connect the diverter valve to the feed water valve and the hose(Picture 1). 4.Insert the 1/4”pipe into the diverter valve(Picture 2). 5.Open the feed water valve and the faucet to check whether connection has leakage or not.
- Page 7 select reset First Use Instruction 1.Connect RO System with adapter,and buzzer rings three times.Then all the LED indicator lights start to flash,and machine will flush for 90 seconds. 2. Auto flush: After being working cumulatively for 2 hours,machine will flush 10 seconds automatically. 3.Manual flush: Keep pressing both Select Button and Reset button for 2 seconds ,machine will enter the flushing mode to flush 90 seconds.
- Page 8 Cartridge Replacement Reminder When lifespan is 20% relevant remaining,relevant LED Light will be on. Buzzer will ring 3 times,when the machine is making water every time. When lifespan is over,buzzer rings 5 times every time the machine is making water. Cartridge Reset Keep pressing the Select button for 2 seconds and it will enter Filter Reset mode.
-
Page 10: Technical Specification
Technical Specification： Feed water quality: Municipal tap water Voltage& Frequency: 100~240V,50/60Hz Working pressure: 0.5Mpa-0.7Mpa Inlet water pressure: 0.1Mpa-0.4Mpa Proper temperature: 5-38℃，Humidity≤90% Purified water flow：0.13L/Min Water Flow Diagram：...
Need help?
Do you have a question about the A05 and is the answer not in the manual?
Questions and answers