Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Kaptia FVd
- Page 1 Quick user guide 09/2024 Page 1...
- Page 2 Each button can be configured independently, so that the remote control can simultaneously have different codes at different frequencies. This device is compatible with the Kaptia Klever system and allows the copying of most fixed codes on the market. Status led...
- Page 3 Operation To program the remote control, it must be connected to the micro USB cable of the Kaptia Klever duplicator. The app will guide you through all the necessary steps until programming is complete. Indicator light The device LED reports the following situations:...
- Page 4 Battery replacement This remote control works with 1 NON-RECHARGEABLE battery type CR2032. To replace it, you must remove the rear screw and then slide a rigid object along the slot to release the entire rear cover. Once opened, the used battery must be removed from the battery holder and replaced with a new one of the same type, respecting the polarity.
- Page 5 Range < 100 meters Status LED color Red Battery 1 x 3V (type CR2032) Compatible system Kaptia Klever Updatable Yes Important: The programming connector should only be used to program the device. Using this connector for any other purpose may damage the device.
Need help?
Do you have a question about the FVd and is the answer not in the manual?
Questions and answers