Page 1
Item ref: 170.809UK CSR-63 Rack-mountable Mixer DSP FX & BT User Manual Version 1.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
Page 2
Introduction Thank you for choosing a Citronic CSR-63 mixer as part of your professional sound system. This product has been developed to provide a wide range of facilities for professional and reliable sound reinforcement. Please read and keep this manual to achieve the best results from your purchase and avoid damage through misuse.
Console layout The CSR-63 compact mixing console has a bank of 6 mono input channels which can accept a balanced microphone input or switchable line/instrument input. There are also 3 stereo inputs for playback devices or line level instruments. All preamps have studio grade, low noise architecture for the cleanest possible path throughout the signal chain.
Channel controls 7. LEVEL 60mm channel fader to set the level of the channel in the main mix 8. GAIN Adjust this to match the input signal level for the channel. Increase this setting if the input source is quiet. Reduce this setting if the channel is overloading or sounds distorted.
22. PROGRAM Turn to change program and press in to confirm the program. Press again to enter edit mode and turn to adjust PARAMETER 1. Press again to confirm PARAMETER 1 setting (press TAP to edit the PARAMETER 2 setting) 23.
A 2-TRACK output (14) is provided on L+R RCA connectors, which may feed additional amplification or recording equipment. For hands-free muting and un-muting of the DSP effects section, a footswitch (momentary type) can be connected to the FX-FOOT-SW input (17) Operation Set the MASTER fader (25) fully down before powering up to avoid loud noises or overload.
Need help?
Do you have a question about the citronic CSR-63 and is the answer not in the manual?
Questions and answers