Advertisement
Quick Links
VT-BAT Backup battery 6F22 9V
Content
Content
Function and purpose
Physical Description
Installation
Package content
Function and purpose
VT-BAT / Reservation battery 9V
Keeps the device operational while the main power source is disabled. The device uses a non-rechargeable 6F22 9V
lithium battery. The Vutlan monitoring system may work from this battery for approximately 1 to 10 hours.
It is used for VT604t, VT825t, and VT855t.
You can use 9V battery enclosed in standard PP3 enclosure
6F22 lithium
Recommended battery
Physical Description
The PCB has no LEDs.
Installation
#
is an extension module that can be purchased separately.
U9VL-JP
Advertisement
Summary of Contents for Vutlan VT-BAT Backup battery 6F22 9V
- Page 1 Keeps the device operational while the main power source is disabled. The device uses a non-rechargeable 6F22 9V lithium battery. The Vutlan monitoring system may work from this battery for approximately 1 to 10 hours. It is used for VT604t, VT825t, and VT855t.
- Page 2 a) Unscrew x2 countersink screws at the panel named “Battery extension slot” located at the back of the monitoring system case. b) take the panel out. Insert the battery inside VT- ACCU PCB unit. 6F22 9V DO NOT USE RECHARGEABLE BATTERY! Only use Non-rechargeable battery!
- Page 3 Slide the battery case so that it locks into the PCB. Screw the unit to the panel that we have unscrewed in step one using x2 screws M3. a) Plug the assembly into the monitoring system slot named “Batttery extenion slot”.
- Page 4 If damage occurred during transportation, contact the appropriate delivery service. Package content Description Quantity PCB (batteries are no included) M3 screws Battery cover Copyright: Vutlan s.r.o. (LLC) Remote Infrastructure Monitoring and Control 43 ul.Svornosti, 821 06 Bratislava, Slovak Republic SE mini reader...
Need help?
Do you have a question about the VT-BAT Backup battery 6F22 9V and is the answer not in the manual?
Questions and answers