Page 1
0.3.0.02.T50010-28-03 E- collar User Manual...
Page 2
Dear Pet Parent! Thank you for purchasing AbbiDot. Here at Abbi, we are happy if you and your pet are happy. We know that nurturing a lasting bond with a pet takes patience, commitment and just a little bit of help. This is why we dedicate all of our time and creative resources to making pet care accessories that are smart and simple.
TABLE OF CONTENTS Overview ..................04 How Do I Use My E-Collar? .............. 05 Step 1. Charge the Remote and Collar ..........05 Step 2. Set Up the Collar ..............05 Step 3. Turn on the Remote and Collar ..........06 Step 4.
OVERVIEW Stimulation Level Knob & Lock LED Indicatior On / Off Button Light Up Button Switch Mode Switch Dog 1 or Dog 2 Mode Tone Button Vibration Button Stimulation Button Remote Charging Port LED Light Contact Points(x4) Test Light On/Off Button Silicone Caps(x4) Charging Port Metal Extension Contact...
HOW DO I USE MY E-COLLAR? 1. Check E-collar settings to ensure they are appropriate for your dog. 2. Ensure your E-Collar is fitted correctly. 3. Begin with Tone or Vibration, then a very low Stimulation setting, gradually increasing until you find a level that works for you. Test all button functions before placing the collar on your dog.
STEP 3. TURN ON THE REMOTE AND COLLAR How To Turn ON/OFF the Remote? 1. To turn on the remote, press and hold the ON/OFF button. 2. The screen will light up and display current channel data and battery level. If the screen doesn’t light up, charge the remote. 3.
STEP 4. TEST ALL BUTTON FUNCTIONS Tone: sends a tone (adjustable in 1-16 levels) to the training collar. Vibration: sends a vibration (adjustable in 1-36 levels) to the training collar. Stimulation: sends static stimulation (adjustable in 1-99 levels) to the training collar. Switch between channels (Dog 1 and Dog 2).
How to Increase/Decrease the Level? Click the power button to switch the training mode(tone/vibration/stimula- tion), the screen will display the current training mode and level, rotate to the right to increase the level, and to the left to decrease the level. Please adjust the level base on your dog's character and weight.
How LED light works? When you can't find your dog in the dark, you can find it by lighting the LED light. Test Light Instructions 1. Make sure the collar is off your dog. 2. Turn on the collar. 3. Hold the test light’s contacts against the contact points of the collar.
STEP 6. CHOOSE THE BEST STIMULATION LEVEL Important: always start with the vibration mode first and use the static Stimulation mode as the last resort. Depending on the model of your training collar, you may be able to access anywhere from one to 99 different stimulation levels. This can help you find the level that is best for your dog.
HOW TO PAIR REMOTE WITH THE COLLAR? 1. On the remote, use the channel switch to select Dog 1. 2. With the remote turned on and the collar turned off, press and hold the ON/OFF button on the collar for 4-5 seconds. 3.
DEVICE INFORMATION Specification Product Name: T50 Dog Training Collar Model: AB-T50 5 (Tone/Vibration/Stimulation) Training Modes: Static Stimulation: Tone 16/Vibration 36/Stimulation 99 Levels Contact Points: Detachable Included Long Contact Points: Wireless Range: Up to 900m (3000 feet) in Open Space Momentary/Continuous Correction:...
TROUBLESHOOTING GUIDE Make sure the Collar is turned on. Check if the battery level is low on either the Collar or the Remote. The range of the remote may be affected by a number of factors like terrain, weather, vegetation, transmis- sion from other radio devices and so on.
No Unlawful or Prohibited Use This Product is designed for use with dogs and cats only. The ABBIDOT dog training collar is not intended to harm, injure or provoke. Using this product in a way that is not intended could result in violation of Federal, State or local laws.
We also want them to respond to commands timely even when at a distance and in the presence of distractions. The ABBIDOT Dog Training Collar is a powerful training tool that can help you attain these results.
TEACHING BASIC OBEDIENCE The “Sit” Command 1. Put a separate, non-metallic collar on your pet’s neck ABOVE the e-collar and attach a 10-foot leash. Note: be sure the extra collar does not put pressure on the contact points. 2. Hold the leash and the remote in one hand. Keep your other hand free to guide your pet into a “Sit”...
Page 17
The “Come” Command 1. Put a separate, non-metallic collar on your pet’s neck ABOVE the collar and attach a 10-foot leash. Note: be sure the extra collar does not put pressure on the contact points. 2. Hold the leash in one hand and the remote in the other.
Page 18
The “Stay” Command 1. Put a separate, non-metallic collar on your pet’s neck ABOVE the collar and attach a 10-foot leash. Note: be sure the extra collar does not put pressure on the contact points. 2. Put your pet on his bed or on a cooling mat. Hold your leash in one hand and the remote in the other.
ELIMINATING UNWANTED BEHAVIOR Jumping Up Pets typically jump up to get attention. If you do not want your pet to jump on you, then friends or members of the family should not encourage this behavior as well. This means that every time your pet jumps on someone, they should be reprimanded or redirected to an alternate and acceptable behavior, for which they can receive praise.
Page 20
Digging It is important to first understand why your pet is digging. Many dogs like terriers, were bred to flush out prey and digging is very natural to them. Other dogs may be digging to find a cool spot to lay down or simply out of boredom.
Page 21
Chasing Chasing is an instinctive behavior stimulated by moving objects. Some dogs have a particularly strong desire to chase that can put them in harm’s way and leave you helpless. Never allow your dog off the leash or out of a contained area until they have learned the “Come” command, regardless of the distraction.
Page 22
6. Repeat this process in several different locations with different temptations. General Tips ● The ABBIDOT Dog Training Collar is not designed to be worn constantly. We strongly advise you to reserve collar usage to active training sessions. When you leave your dog unattended, make sure to take the collar off.
● Should your dog react to the training by hiding or acting fearfully, try to redirect their attention to a simple command such as “Speak” or “Sit” to calm them down. Use treats to help your dog understand what commands have been done correctly. TRAINING LARGE BREEDS What Setting Should You Use with Large Breeds? You might need to use a higher setting with your large breed dog! Even...
TRAINING SMALL DOGS What Setting Should You Use with Small Breeds? Because smaller dogs are much more delicate, you want to stay on a lower setting. Begin with an audible tone or vibration, moving to one of the lower settings if necessary. Only move up if your dog doesn’t respond to the current setting.Be very cautious when training small puppies.
DOG TRAINING TERMS AND WHAT THEY MEAN Training Marker A ‘marker’ is something we use to mark good behavior. A dog clicker is used as a marker to mark good behavior before that treat comes! You can also use the sound setting on your electric collar to mark good behavior! Dog Training Reinforcement Reinforcement is exactly what the word implies.
FREQUENTLY ASKED QUESTIONS It fully depends on your and your pet’s Once my pet’s training is situation. You might need to reinforce the complete, do I need to results of collar training from time to time. keep using the collar? No longer than 10 seconds for Vibration mode.
Page 27
While the Vibration/Shock stimulation may be unpleasant, it is generally harmless to Is the Vibration/Shock your pet when used correctly. However, safe for my pet? your input as a trainer is essential in ensuring the safety of this process. Your pet should be able to recognize basic How old does my pet have obedience commands such as “Sit”...
Need help?
Do you have a question about the T50 and is the answer not in the manual?
Questions and answers
When I press the S button, a red light appears on the remote and there is no stimulation.
The red light on the AbbiDot T50 remote indicates that the Stimulation function is locked when the S button is pressed and there is no stimulation.
This answer is automatically generated