Download Print this page

UWELL CALIBURN AK3 User Manual

Pod system

Download this manual

CALIBURN AK3 Pod System

Need help?

Do you have a question about the CALIBURN AK3 and is the answer not in the manual?

Page 1 CALIBURN AK3 Pod System...
Page 2 Illustration Drip tip Device Air inlet indicator Type-C port Quick Guide 1. Take the pod off the device, remove the insulating film from the bottom of the pod, and put it back. 2. Remove the drip tip and fill e-liquid through the red filling port. Let the pod sit for 10 minutes before use.
Page 3: Specifications
Specifications ● Materials: PCTG, Aluminium Alloy ● Dimensions: 67.5 mm × 44.1 mm × 12 mm ● Net Weight: 35.8 g ● E-liquid Capacity: 2 ml ● Output Power: Maximum 13 W ● Pod Specification: FeCrAl Meshed 1.0 Ω CALIBURN A3 Refillable Pod ●...
Page 4 Attention: a. Fill the e-liquid into the red port. Please don’t fill through the middle airway. Put the drip tip back as soon as the filling is done and make sure it is properly installed to prevent e-liquid leakage. b. Let the pod sit for 10 minutes after the first filling to avoid coil burning.
Page 5 5. Protection and indication a. Short-circuit protection: When short-circuit occurs, the light will flash 3 times in red when vaping, and the device will stop output. b. Low voltage protection: When the device is at low power, the light will flash 10 times in red, and the device will stop output. c.