Advertisement
DP-666 High Sensitivity Color Screen Radio
Deepelec Store :
https://deepelec.aliexpress.com/store/1101363542
Charging Instructions:
This machine is charged via a TYPE-C port, and there is a charging LED above the TYPE-C port.
Please use a charging head with a voltage of 5V and a current of 1A or above to charge the machine.
The maximum charging power is 5W and fast charging is not supported.
It is recommended to charge with the device turned off.
The charging LED turns red
when charging and turns green
when fully charged.
Packing List:
1. Host *1 (with 3.7V/5000mAh lithium battery installed)
2. High quality telescopic antenna with SMA connector *1
3. USB-A to TYPE-C 1 meter data cable *1
4. Storage bag *1
Packaged weight 450g, packaged size: 20*14*4CM
Firmware Upgrade:
1. Upgrade via the TYPE-C port. Use the included data cable to connect the radio to the computer. A
new COM port will appear on the computer.
2. Press and hold the ESP32 BOOT button, then turn on the radio to enter upgrade mode.
For firmware downloads, please visit:
https://deepelec.com/dp-666
www.deepelec.com
Advertisement
Need help?
Do you have a question about the DP-666 and is the answer not in the manual?
Questions and answers
change to English
Does using the headphone jack cause any signal changes? A main drawback of the DX-286 is that the headphone jack seems to disconnect or attenuate the signal being received by its whip antenna.