Download Print this page

RB GET OUTSIDE 61459-600-DG Installation Instructions Manual

Enclosed shower

Advertisement

Quick Links

General Notes
Please read all instructions thoroughly before starting installing this product.
Please unpack and inspect shower from any damage from shipping. If damages have occurred, please contact RB
Components so we can start the shipping claim process.
Assembly is required. Best to be installed by a skilled technician.
Hardware Included
14x - ¼-20 rivnuts
14x - ¼-20 x 1" button head stainless screws
16x - ¼ - 20 x ¾" button head stainless screws
32x - ¼" washers
16x – ¼-20 nylon lock nut stainless
1x – small tube of anti seize for stainless hardware
Tools Needed
5/32 allen wrench
¼" drill bit
1/8" drill bit (for small pilot hole)
Drill
Hole saw for making hole in shower pan for drain (size depends on drain size you are installing).
Silicone for sealing joints in shower
Shower Location
It's best to locate where in your van exactly where your shower will be mounted. Typically, the shower is
mounted along the driver's side of the van. It is strongly recommended, to not mount the shower in front of a
window as the shower needs to be mounted up against the wall and the window will limit your wall mounting
options.
Each van build is different and depending on your plumbing you may have nothing under your van that would
interfere with any drains from the shower. Always take note before drilling any holes for the shower drain to
double check under your van.
Its best to install the shower prior to any wall or ceiling panel installation as it will make the install much easier.
RB does not put a drain hole in the shower pan as we do not know the exact location of your shower and drain.
This can be done simply by using a hole saw to the size of the drain you are going to install in the shower pan.
Installation
1) First step is to mark and cut the drain hole in the shower pan. You should have laid the shower pan in the van to get
an idea of the location of where your shower will be mounted. RB offers a low profile drain and strainer that works
great (#61459-143-SKIT)
RB Components 14050 Freeway Drive Santa Fe Springs CA 90670
RB Enclosed Shower / Installation Instructions
info@rbcomponents.com
(562) 802-1200

Advertisement

loading
Need help?

Need help?

Do you have a question about the GET OUTSIDE 61459-600-DG and is the answer not in the manual?

Questions and answers

Summary of Contents for RB GET OUTSIDE 61459-600-DG

  • Page 1  RB does not put a drain hole in the shower pan as we do not know the exact location of your shower and drain. This can be done simply by using a hole saw to the size of the drain you are going to install in the shower pan.
  • Page 2 4) With the shower now in the van and moved to the exact spot you want it, you can now raise the shower enclosure to the ceiling of your van by using a ratcheting cargo bar to keep the shower enclosure in place firmly to the ceilng. (https://www.harborfreight.com/ratcheting-cargo-bar-96811.html). RB Components 14050 Freeway Drive Santa Fe Springs CA 90670 info@rbcomponents.com (562) 802-1200...
  • Page 3 This is where the steel is in the wall of the van. Drill a pilot hole thru the back panel and into the steel of the van. This will allow you to locate where the rivnuts are mounted in the wall of the van. RB Components 14050 Freeway Drive Santa Fe Springs CA 90670 info@rbcomponents.com...
  • Page 4 Using the ¼-20 x ¾” button head screws to secure the enclosure to the shower pan (*no hardware is need for securing the back of the shower pan to the shower enclosure). RB Components 14050 Freeway Drive Santa Fe Springs CA 90670 info@rbcomponents.com (562) 802-1200...
  • Page 5 10) Installation is now complete. If you need further assistance please do not hesitate to reach out and speak to one of our adventure van specialist. RB Components 14050 Freeway Drive Santa Fe Springs CA 90670 info@rbcomponents.com (562) 802-1200...
  • Page 6 RB Enclosed Shower / Installation Instructions RB Components 14050 Freeway Drive Santa Fe Springs CA 90670 info@rbcomponents.com (562) 802-1200...