Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Nio Power Home 2.0
- Page 1 NIO Power Home 2.0 User Manual...
-
Page 2: Table Of Contents
Table of Contents Product Specifications ..................3 Copyrights ......................3 Safety Information ....................3 Important Safety Instructions ................3 Warnings......................3 Specifications ......................4 Before You Begin ....................6 Installation Planning .................... 6 Installation Preparation ..................6 Wall-mounted Installation ..............6 2. -
Page 3: Product Specifications
Warning: Do not expose the Power Home 2.0 to excessive contact with water and never touch the Power Home 2.0 and cables with wet hands. This leads to the risk of electric shock, which can cause serious or fatal injuries. Do not aim a strong jet of water at or against the Power Home 2.0. -
Page 4: Specifications
Warning: Do not attempt to disassemble, repair, tamper with, or modify the Power Home 2.0. Contact NIO for any repairs or modifications. Warning: Do not forcefully fold or apply pressure to any part of the Power Home 2.0 or damage it with sharp objects. - Page 5 Operating Altitude ≤ 2000 m Operating Humidity 5% to 95%, no condensation Enclosure Rating IP55 Protection Degree CLASS I Reserved Power Supply Cable Length 1.2 m Enclosure Materials UL94-V0 Flame retardant plastic Charger Station Dimensions 218 x 345 x 153 mm (W x H x D) Net Weight 6.3 kg Residual Current Monitoring (RCM)
-
Page 6: Before You Begin
Before You Begin The Power Home must be installed by an authorized installation company. The installation of the Power Home involves electrical construction that must be performed in accordance with relevant specifications and standards. Please select a qualified electrical service provider to ensure the construction complies with the national and local standards. -
Page 7: Free-Standing Installation
Free-standing Installation If there is no load bearing wall near the parking space, you can install the Power Home 2.0 in a free-standing manner. For installation to the side of the vehicle, the pole should be at least 0.4m from the edge of the parking space so that the charging cable will not be pulled or driven over. -
Page 8: Packing List
Packing List Packing Items Charging Station (Power Home) Charging Cable Holder Expansion Bolt Packing List & Delivery Inspection Report Certification User's Manual Product Schematic... -
Page 9: Notes
Notes: • The Reset button is only used in emergencies. Do not use this button unless it is an emergency. • Pressing this button stops the charging, and the indicator light turns steady red. After pulling out the charging plug, connected to the car, the Power Home will return to its normal standby mode if no fault is detected. - Page 10 Notes: • The distribution box should be installed in a dry place with minimum exposure to dust, corrosion or vibration. In an outdoor environment, bottom entry and bottom exit installation should be adopted with measures taken to protect the equipment from water. •...
-
Page 11: Free-Standing Installation Instructions
Prepare a $232mm threading hole at the center of the cement foundation for the power supply cable to run through. Step 3: The Power Home 2.0 pole has reserved holes for installing the charger and the charging cable holder. Use bolts to attach mounting plate 2, insert mounting plate 1 into mounting plate 2, and tighten the screws at the bottom of the Power Home to secure the Power Home to the pole. - Page 12 NIO customer center: 800 24 789. The customer center must receive: The product ID number (can be found on the side of the Power Home box). Name, location, and email of the owner (same e-mail as used for login in the NIO app).
-
Page 13: Charging Guide
Charging Guide Charging Cable • When the Power Home 2.0 is powered on and in the idle state, the indicator light on the charger is steady blue. • Insert the charging plug completely in the AC charging port of the vehicle. -
Page 14: Using App
Paste the Bluetooth pairing code (copied automatically) into the field to complete connection. Go back to the NIO app for operations. Troubleshooting • If the indicator light of the Power Home 2.0 shows steady red, go to the NIO app for troubleshooting. -
Page 15: Product Warranty
Product Warranty Warranty Terms The warranty covers quality issues arising from the design, manufacturing and raw material defects of the NIO Power Home 2.0 charging device. For any issues not covered by the warranty, fees will be charged. Warranty Period NIO provides a five-year warranty for the NIO Power Home 2.0 charging device from... -
Page 16: Disposal
Guarantor This warranty is provided by NIO Norway A.S. located at Karl Johansgate 33, 0162 Oslo, Norway. Consumer Law Nothing in this warranty limits your legal rights under mandatory Norwegian consumer legislation, including the Consumer Purchase Act, which apply in addition to the warranty. -
Page 17: Declaration Of Conformity
Declaration of Conformity...
Need help?
Do you have a question about the Power Home 2.0 and is the answer not in the manual?
Questions and answers