Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Met One Instruments TACMET II 102813A
Summary of Contents for Met One Instruments TACMET II 102813A
- Page 1 102813A TACMET WEATHER STATION OPERATION MANUAL Met One Instruments, Inc. Corporate Sales & Service: 1600 NW Washington Blvd. Grants Pass, OR 97526 Tel (541) 471-7111 Fax (541) 471-7116 www.metone.com www.service@metone.com...
- Page 3 Monday – Friday 7:00 a.m. to 4:00 p.m. Pacific Time. Voice: (541) 471-7111 Fax: (541) 471-7116 E-Mail: service@metone.com Mail: Technical Services Department Met One Instruments, Inc. 1600 NW Washington Blvd Grants Pass, OR 97526 ISO 9001:2015 Certified 102813A-9800 Operation Manual Revision B, 10/3/2024...
- Page 4 (1) year from the date of shipment. Should any instrument or part prove to be defective within the warranty period, upon written notice and return of the unit (freight prepaid), Met One Instruments, Inc. will, at its option, repair or replace the defective unit, and return it, transportation prepaid via UPS.
-
Page 5: Table Of Contents
Table of Contents Safety..........................4 Introduction & Overview – TACMETacmet 2010 Weather Station ....5 Overview ..............................5 Specifications ............................5 Installation ........................6 Input/Output Connections ................... 6 User Interface ........................6 Calibration ........................7 Maintenance ........................7 Appendix A - Theory of Operation................8 ISO 9001:2015 Certified 102813A-9800 Operation Manual Revision B, 10/3/2024... -
Page 6: Safety
Safety Safety This manual may include a CAUTION and a WARNING indication. Familiarize yourself with the following definitions for the meanings of these indicators. CAUTION indicates a hazard and calls attention to a procedure that if not correctly followed could result in damage to the instrument. Do not proceed beyond a caution indicator without understanding the hazard. -
Page 7: Introduction & Overview - Tacmetacmet 2010 Weather Station
Introduction & Overview – 102813A TACMET 2010 Weather Station Overview Met One’s 102813A TACMET 2010 weather station is designed as a stand-alone weather station to provide accurate measurements of wind speed, wind direction, temperature and relative humidity. The unit has no moving parts and is ideally suited for use wherever reliable, maintenance free operation over a wide operating range under adverse operating conditions is required. -
Page 8: Installation
Installation Be sure to mount the sensor in a clear, open area to minimize any turbulent effects caused by local obstructions (e.g., trees, buildings, etc.). The sensor is typically installed on Met One’s P/N 102656-G pre-wired sensor mounts. The keyway in the connector on the base of the sensor is matched to the keyway on the mount. -
Page 9: Calibration
The auxiliary serial port output (pin F on the connector) is set for 19,200 baud (N/8/1) and outputs a complete data string approximately once per second. The data is easily viewed and can be displayed and captured using Met One’s WeatherView Software or Windows HyperTerminal. -
Page 10: Appendix A - Theory Of Operation
Appendix A Theory of Operation Winds Met One’s sonic anemometer operates on the principal that the speed of the wind affects the time it takes for sound to travel from one point to a second point. If the sound is traveling in the direction of the wind then the transit time is decreased.
Need help?
Do you have a question about the TACMET II 102813A and is the answer not in the manual?
Questions and answers